53225 Datasheet, PDF (1/5 Pages) Micropac Industries – SOLID-STATE POWER CONTROLLER (SSPC)

53225
SOLID-STATE POWER CONTROLLER (SSPC)
Mii
HYBRID MICROELECTRONICS
PRODUCTS DIVISION
Features:
• I²t output trip
• Output trip status
• 1000 VRMS Isolation
• Power FET Output
Low On-state Resistance
• Full Military compliance
• Low control power consumption (3 mA @ 5 V
typical)
• 125ºC screening available
Applications:
• Logic controlled circuit breakers
• Dynamic load switching
• Power distribution switch
• Supply source switching
DESCRIPTION
The 53225 is a military SPST solid-state relay. This light-weight device is mechanically resistant and electrically immune
to contact-related problems inherent in mechanical relays.
An I²t current let-through curve assures power supply, relay, and load protection from thermal stress yet provides large
momentary currents to charge capacitive loads or start inductive loads. Any current versus time above the I²t curve
initiates a trip condition and a status output is generated.
Effective isolation of 1000 VRMS is provided from all inputs, case and outputs through magnetic coupling. Magnetic
coupling contributes to very low control power, repeatable turn-on/turn-off times, and no output stage currents to provide
status signals.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: [e-mail] 12/10/01
1