53200 Datasheet, PDF (1/4 Pages) Micropac Industries – SPDT SOLID-STATE RELAYS

53200
53203
53204
SPDT SOLID-STATE RELAYS
Mii
MICROCIRCUITS PRODUCTS
DIVISION
Features:
• Replacements for M31-1, M31-1A, M31-2 A
• SPDT, Break-Before-Make
• Up to 1500 V RMS Optical Isolation
• Output current up to 8.2 Amps (53203)
• Power FET Output Low On-state Resistance
• Full Military Temperature Operation:
-55ºC to +125ºC
• Military Environmental Screening Available
Applications:
• Heater Load Switching
• Sensor Activation
• Remote Signal Activation
• Servo and synchro control
• High power switching
DESCRIPTION
The MII 53200, 53203, and 53204 are military SPDT high power, solid-state relays. These light-weight devices are resistant
to damage from shock and vibration, and are immune to contact-related problems (contamination, arcing) associated with
mechanical equivalents. Optical coupling between the input and output stages provides effective isolation up to 1500 volts
AC RMS. Power FET outputs eliminate bipolar offset, and minimize output voltage drop for high current capability. The
control logic is CMOS compatible, and will accommodate bias supplies between 4 and 16 VDC. A TTL input driver with pull-
up resistor may also be used. These solid-state relays are ideal for use in military systems, or wherever high reliability, low
power actuation, and light-weight are design considerations. Applications include general-purpose signal switching and
electronic load control.
ABSOLUTE MAXIMUM RATINGS
Isolation Voltage¹ .................................................................................................................................................1000 VAC RMS
Continuous Operating Output Voltage³: 53200...............................................................................................................80 VDC
53203 ..............................................................................................................80 VDC
53204 ............................................................................................................160 VDC
Load Current²: 53200 ...........................................................................................................................................4.8 Amps DC
53203 ..........................................................................................................................................8.2 Amps DC
53204...........................................................................................................................................5.2 Amps DC
Bias Supply Voltage, V_DD .................................................................................................................................................16 VDC
Control Logic Input Voltage ..............................................................................................................................................16 VDC
Operating Temperature ........................................................................................................................... -55ºC to +125ºC Case
Storage Temperature .........................................................................................................................................-55ºC to +125ºC
Notes: ¹ 60 Hz sine wave
2 _{at 25ºC with 2.0º C/W heat sink}
3 _{Reversing polarity on the output may cause}
permanent damage.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: [e-mail] 8/12/02
Pg. 1 of 4