53115 Datasheet, PDF (1/8 Pages) Micropac Industries – Hermetically Sealed 8-Pin Dual-In-Line package

53115
POWER MOSFET OPTOCOUPLER,
480V / 0.28A / 0.55A, AC/DC, Hermetically Sealed
Mii
HYBRID MICROELECTRONICS
PRODUCTS DIVISION
Features:
 Hermetically Sealed 8-Pin Dual-In-Line package
 Small Size and Weight
 Options: 5mA or 10mA input forward current
 Performance Guaranteed over –55°C to
+125°C Ambient Temperature
 AC / DC Signal & Power Switching
 Maximum Average Current
AC/DC: 0.28 A
DC only: 0.55 A
 1500 VDC Withstand Test Voltage
 High Transient Immunity
Applications:
 Satellite/Space Systems
 Military/High Reliability Systems
 AC/DC Electromechanical and Solid State
 Relay Replacement
 I/O Modules
DESCRIPTION
The 53115 is a single channel, hermetically sealed, power MOSFET optocoupler. Low on-
resistance of the MOSFET output, combined with 1500 VDC isolation between input and output,
makes this optocoupler ideal for solid state relay applications. Operation is specified over the full
military temperature range. The part is supplied in an eight-pin, dual-in-line ceramic package.
Lead options support both through-hole and surface-mount assembly. Standard lead finish is
gold plated.
Functionally, the device operates as a single-pole, normally open (1 Form A) solid state relay.
The device is actuated by an input current, which can be supplied from standard logic types
such as open-collector TTL. The input current biases a light emitting diode that is optically
coupled to an integrated photovoltaic diode array. The photovoltaic array powers control circuitry
that operates the output MOSFETs.
Optimum switching of either AC or DC loads is provided by a configurable output. For AC loads,
connection A in Figure 1 must be used. Connection A will also switch DC loads but connection
B, in Figure 1, provides DC-only operation with the advantages of substantial reduction in on-
resistance and twice the output current capability as that obtained with connection A.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION  905 E. Walnut St., Garland, TX 75040  [phone]  Fax [phone]
www.micropac.com
E-MAIL: [e-mail]
Rev A
02 08 2013
1