4N22A Datasheet, PDF (1/3 Pages) Micropac Industries – JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS

4N22A
4N23A
4N24A
JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
• Collector is electrically isolated from the case.
• Overall current gain...1.5 typical (4N24A)
• Base lead provided for conventional transistor
biasing
• Rugged package
• High gain, high voltage transistor
• +1kV electrical isolation
Applications:
• Eliminate ground loops
• Level shifting
• Line receiver
• Switching power supplies
• Motor control
DESCRIPTION
Gallium Aluminum Arsenide (GaAlAs) infrared LED and a high gain N-P-N silicon phototransistor packaged in a hermetically
sealed metal case. The 4N22A, 4N23A and 4N24A can be tested to customer specifications, as well as to MIL-PRF-19500
JAN, JANS, JANTX, and JANTXV quality levels.
*ABSOLUTE MAXIMUM RATINGS
Input to Output Voltage.............................................................................................................................................................±1kV
Emitter-Collector Voltage..............................................................................................................................................................4V
Collector-Emitter Voltage............................................................................................................................................................35V
Collector-Base Voltage ...............................................................................................................................................................35V
Reverse Input Voltage .................................................................................................................................................................2V
Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ....................................... 40mA
Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) .................................................................................1A
Continuous Collector Current ................................................................................................................................................. 50mA
Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ................................... 300mW
Storage Temperature............................................................................................................................................. -65°C to +125°C
Operating Free-Air Temperature Range ............................................................................................................... -55°C to +125°C
Lead Solder Temperature (1/16” (1.6mm) from case for 10 seconds) ..................................................................................240°C
Notes:
1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C.
2. Derate linearly to 125°C free-air temperature at the rate of 5 mW/°C.
* JEDEC registered data
Package Dimensions
Schematic Diagram
0.040 [1.02]
C3
MAX.
6 LEADS
0.305 [7.75]
0.335 [8.51]
0.016Ø [0.41]
0.019Ø [0.48]
0.022Ø [5.08]
56
3
7
2
1
0.045 [1.14]
5A
0.029 [0.73]
E1
0.500 [12.70]
MIN.
45°
0.155 [3.94]
0.185 [4.70]
0.034 [0.864]
0.028 [0.711]
TO5
7K
B2
NOTE: ALL LINEAR DIMENSIONS ARE IN INCHES (MILLIMETERS)
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • [phone] • Fax [phone]
www.micropac.com E-MAIL: [e-mail]
3 - 10