NMA-2410 Datasheet, PDF (1/1 Pages) Micronetics, Inc. – NOISE MODULES 10 MHZ TO 8.5 GHZ

NMA 2400 SERIES NOISE MODULES
10 MHZ TO 8.5 GHZ
NMA 2400 MODULES RF SPECIFICATIONS BY MODEL NUMBER
MODEL
FREQUENCY
NMA-2410 10MHz - 1.0GHz
NOISE OUTPUT LEVEL
FLATNESS *
(window)
dBm/BAND dBm/Hz
(min)
(min)
2.0dB
0
-90.0
ENR(dB)
(min)
84.0
NMA-2411
NMA-2412
NMA-2413
10MHz - 1.5GHz
10MHz - 2.0GHz
10MHz - 4.0GHz
2.0dB
3.0dB
4.0dB
0
-91.8 82.2
0
-93.0 81.0
0
-96.0 78.0
NMA-2414
NMA-2415
NMA-2416
100MHz - 6.0GHz
30MHz - 3.0GHz
7.8GHz - 8.5GHz
4.0dB
3.0dB
2.0dB
-3
-100.0 74.0
-1
-96.0 78.0
-11 -100.0 74.0
NMA-2417 2.0GHz - 8.0GHz
4.0dB
-2
-100.0 74.0
* Flatness is defined as the decibel ratio of the highest amplitude peak minus the lowest
across the frequency band.
PERFORMANCE TEST DATA
Each unit ships standard with a spectrum analyzer plot of the noise
output.
Upon special request, Micronetics can supply tabular data
in text file format on CD-ROM or floppy disk. The data
points consist of power spectral density at discrete
frequency points across the frequency band.
HOW TO ORDER
USEFUL NOISE CONVERSIONS
0 dB ENR = -174 dBm/Hz
(equ 1)
Power (dBm) = N0 +10_log (BW)
(equ 2)
where:
N0 = Noise spectral density in dBm/Hz
BW = Bandwidth in Hz
INSTALLATION NOTES
1) Should be mounted to a thermally conductive baseplate
2) Select style code T for mechanical clearance of
mating SMA (m) connector nut with respect to
thermally conductive baseplate
3) Warning: when using a narrow band filter following
the noise module, use a 3 dB or greater pad to
prevent damage caused by reflected power
NMA-24xx-xxx
Model #
(see selection above)
Voltage
A = 15V
B = 12V
Option
1 = Stnd
2 = TTL
Package
S = Pkg Style S
T = Pkg Style T
/ 26 HAMPSHIRE DRIVE /HUDSON,NH03051/TEL:[phone]/FAX:[phone]
DESCRIPTION
The NMA 2400 Noise Module is
ideal for applications like jamming
and built-in-test where high power
and small size are required. The
internally regulated driver provides
long term highly stable noise out-
put. Optional TTL is available for
microprocessor control.
Each NMA 2400 model is designed
for easy integration into a wide
range of equipment, from test sets
to radar units.
SPECIFICATIONS
? Operating Temperature:
-30 to +85oC
? Storage Temperature:
-65 to +125oC
? Supply Voltage: +12 / +15 VDC
Internally regulated
? Current Draw 350mA max
? Output Impedance: 50 ohm
? Peak Factor: 5:1
specifications subject to change
based on technological advances
APPLICATIONS
? Frequency response built-in-test
(BIT) for communication receivers
? Antenna/RF front end testing
? 70/140 MHz & L-Band modem
BER testing
? Noise and interference simulation
? Jamming / jamming simulation
? Power distribution calibration of
multiple receiver systems