NMA-2101 Datasheet, PDF (1/1 Pages) Micronetics, Inc. – NMA 2100 NOISE SOURCE SERIES

s_{NMA 2100 NOISE SOURCE SERIES}
100HZ TO 1GHZ
DIP package
T package
NMA 2100 OUTPUT CHARACTERISTICS
MODEL*
FREQUENCY
NOISE OUTPUT LEVEL
FLATNESS mV/BAND µV/√=Hz dBm/BAND dBm/Hz ENR(dB)
NMA-2101 ^{+100Hz-100kHz} ±1.0dB
177
561
NMA-2102 ^{+100Hz-300kHz} ±1.0dB
300
550
NMA-2103 ^+100Hz-1MHz ±1.0dB
300
300
NMA-2104 ^+100Hz-3MHz ±1.0dB
300
174
NMA-2105 ^+100Hz-10MHz ±1.0dB
300
95
NMA-2106 ^+100Hz-30MHz ±1.0dB
300
55
-2.0 -52.0 122.0
+2.6 -52.2 121.8
+2.6 -57.5 116.5
+2.6 -62.2 111.8
+2.6 -67.5 106.5
+2.6 -72.2 101.8
NMA-2107 1kHz-100MHz ±1.5dB 300
30
+2.6 -77.4 96.6
NMA-2108 1kHz-300MHz ±2.0dB 300
17
+2.6 -82.2 91.8
NMA-2109 1kHz-500MHz ±2.0dB 300
13
+2.6 -84.4 89.6
NMA-2110 1kHz-1GHz ±2.0dB 300
10
+2.6 -87.4 86.6
* Available in SMA connectorized package, specify on quote/orders by adding “S” to Model No.
+ _{Low frequency limit of 100Hz requires a 47mf capacitor wired between pins 13 and 15.}
Low frequency limit is 500 Hz without capacitor for 50 ohm models only.
Warning: when using a narrow band filter following the noise module, use a 3 dB or greater pad to
prevent damage caused by reflected power.
6.2008
DESCRIPTION
The NMA 2100 High
Power Noise Source
Series are designed for
testing wideband systems
(CDMA, spread spectrum,
FM, VHF, UHF) with wide-
band signals. Available in
standard 24 Pin DIP pack-
ages for easy system inte-
gration, as well as SMA
connectorized packages.
SPECIFICATIONS
■ Operating
Temperature:
-55 to +95^oC
■_{-65Sttoor+ag1e25To}eCmperature:
■ Supply Voltage:
+15 VDC
■ Temperature Stability:
0.025 dB/^oC
■ Output Impedance:
50 ohm
■ Peak Factor: 5:1
APPLICATIONS
■ Back-up source in
redundant transmitters
■ Built-in self-test in
communication
receivers
■ Power distribution in
cellular base stations
■ Component testing
reference pakage styles: E , T, S for dimensions
MICRONETICS / 26 HAMPSHIRE DRIVE / HUDSON, NH 03051 / TEL: [phone] / FAX: [phone]
WEB: WWW.MICRONETICS.COM