English
Language : 

CNS7106 Datasheet, PDF (1/2 Pages) Micronetics, Inc. – COAXIAL AMPLIFIED NOISE SOURCE
CNS7106
COAXIAL AMPLIFIED NOISE SOURCE
CNS7106 TYPICAL DATA
SPECIFICATIONS
• Frequency:
200 kHz to 10 MHz
• Noise Power Spectral Density (No): -79 dBm/Hz
• Noise Power (N): -10 dBm
• Spectral Flatness: 1 dB (total window)
• Bias:
12 Vdc, Internally Regulated
• Current Draw: 35 mA Max
• Peak Factor: 5:1
• Operating Temp: -55 to +85 C
• Storage Temp: -55 to 125 C
available
from stock
200 KHZ TO 12 MHZ
DESCRIPTION
The CNS7106 noise module is designed
for a wide range of applications.
It features high noise output amplitude
for uses ranging from encryption to jam-
ming. All biasing and amplification circuit-
ry is built-in making it easy to design into
your system. It features a built-in voltage
regulator for highly stable output even if
your DC supply lines are not.
APPLICATIONS
Common Noise Applications
1. Barrage Jamming:
The noise source is fed into the tuning
port of a VCO via a bias tee and a posi-
tive DC voltage. The random nature of
noise makes the output of the VCO to
hop around in a given frequency band
randomly making an ideal jamming sig-
nal. Further circuitry can be used
between the noise source and tuning
port to shape the noise probability den-
sity function (PDF) for the desired jam-
ming effect.
2. Random Number Generation for
Encryption:
Noise sources being truly random (not
pseudorandom) give the ultimate in
secure communication because of their
ability to generate a truly random num-
ber pattern. This can be used to seed
an encryption key for authentication.
The noise signal can be fed directly into
an A/D converter for sampling or a sim-
pler techniques might use a comparator.
Further shaping of the noise is often
employed whether either analog if in
front of the A/D converter or afterwards
using DSP.
MICRONETICS, HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 / NOISESALES@MICRONETICS.COM
WWW.MICRONETICS.COM