HAL525 Datasheet, PDF (12/24 Pages) List of Unclassifed Manufacturers – Hall Effect Sensor IC

HAL 525, HAL 526
DATA SHEET
3.2. Dimensions of Sensitive Area
0.25 mm × 0.12 mm
3.3. Positions of Sensitive Areas
SOT89B-1
y 0.95 mm nominal
A4 0.3 mm nominal
D1 see drawing
H1 Not applicable
TO92UA-1/-2
1.0 mm nominal
0.3 mm nominal
3.05 mm ± 0.05 mm
min. 21 mm
max. 23.1 mm
3.4. Absolute Maximum Ratings
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute
maximum rating conditions for extended periods will affect device reliability.
This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric
fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than abso-
lute maximum-rated voltages to this circuit.
All voltages listed are referenced to ground (GND).
Symbol
V_DD
V_O
I_O
T_J
Parameter
Supply Voltage
Output Voltage
Continuous Output On Current
Junction Temperature Range
1)
2)
as
t<
long as
1000h
T_Jmax
is
not
exceeded
Pin No.
1
3
3
Min.
−15
−0.3
−
−40
−40
Max.
28¹⁾
28¹⁾
50¹⁾
150
170²⁾
Unit
V
V
mA
°C
3.4.1. Storage and Shelf Life
The permissible storage time (shelf life) of the sensors is unlimited, provided the sensors are stored at a maximum of
30 °C and a maximum of 85% relative humidity. At these conditions, no Dry Pack is required.
Solderability is guaranteed for one year from the date code on the package.
12
Nov. 30, 2009; DSH000144_003EN
Micronas