N25Q128A11ESE40G Datasheet, PDF (79/82 Pages) Micron Technology – Micron Serial NOR Flash Memory

128Mb, Multiple I/O Serial Flash Memory
Part Number Ordering Information
Part Number Ordering Information
Micron Serial NOR Flash devices are available in different configurations and densities.
Verify valid part numbers by using Micron’s part catalog search at micron.com. To com-
pare features and specifications by device type, visit micron.com/products. Contact the
factory for devices not found.
For more information on how to identify products and top-side marking by the process
identification letter, refer to technical note TN-12-24, "Serial Flash Memory Device
Marking for the M25P, M25PE, M25PX, and N25Q Product Families."
Table 40: Part Number Information
Part Number
Category
Device type
Density
Technology
Feature set
Operating voltage
Block structure
Package
(RoHS-compliant)
Temperature and
test flow
Security features
Shipping material
Category Details
N25Q = Serial NOR Flash memory, Multiple Input/Output (Single, Dual, Quad I/O), XIP
128 = 128Mb
A = 65nm
1 = Byte addressability; HOLD pin; Micron XIP
2 = Byte addressability; HOLD pin; Basic XIP
3 = Byte addressability; RST# pin; Micron XIP
4 = Byte addressability; RST# pin; Basic XIP
1 = V_CC = 1.7 to 2.0V
E = Uniform (64KB and 4KB)
F7 = V-PDFN-8 6mm x 5mm Sawn (MLP8 6mm x 5mm)
F8 = V-PDFN-8 8mm x 6mm (MLP8 8mm x 6mm)
12 = T-PBGA-24b05 6mm x 8mm
SF = SOP2-16 300 mils body width (SO16W)
SE = SOP2-8 208 mils body width (SO8W)
4 = IT: –40°C to +85°C; Device tested with standard test flow
A = Automotive temperature range: –40 to +125°C; Device tested with high reliability cer-
tified test flow
H = IT: –40°C to +85°C; Device tested with high reliability certified test flow
0 = Default
E = Tray
F = Tape and reel
G = Tube
Note: 1. Additional secure options are available upon customer request.
Notes
1
Table 41: Package Details
Micron SPI
and JEDEC
Category
V-PDFN-8
6mm x 5mm
Sawn
Shortened
Package
Name
DFN/6mm x
5mm
Sawn
Package Description
Very thin, plastic small-out-
line, 8 terminal pads (no
leads), 6mm x 5mm Sawn
M25P
M45PE
Symbol
MS
N25Q
Symbol
F7
M25P
M45PE Pack-
age Names
MLP8, DFN8,
VDFPN8,
VFQFPN8
Alternate
Package Name
V-PSON1-8/6mm
x 5mm Sawn,
VSON
PDF: 09005aef845665f6
n25q_128mb_1_8v_65nm.pdf - Rev. L 01/2013 EN
79
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2012 Micron Technology, Inc. All rights reserved.