MT4LC4M16R6 Datasheet, PDF (24/24 Pages) Micron Technology – DRAM

50-PIN PLASTIC TSOP (400 mil)
4 MEG x 16
EDO DRAM
21.04
20.88
.88
TYP
50
11.86
11.66
10.21
10.11
SEE DETAIL A
1
25
.80
TYP
.45
.18
.13
PIN #1 ID
.30
.25
.20
.05
GAGE PLANE
.10
1.2
MAX
.60
.40
DETAIL A
.80
TYP
NOTE: 1. All dimensions in millimeters ^MAX or typical where noted.
MIN
2. Package width and length do not include mold protrusion; allowable mold protrusion is .25mm per side.
8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: [phone]
E-mail: [e-mail], Internet: http://www.micron.com, Customer Comment Line: 800-932-4992
Micron is a registered trademark and the Micron logo and M logo are trademarks of Micron Technology, Inc.
4 Meg x 16 EDO DRAM
D29_C.p65 – Rev. 2/01
24
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2001, Micron Technology, Inc.