MT40A1G16WBU-083E Datasheet, PDF (15/19 Pages) Micron Technology – TwinDie 1.2V DDR4 SDRAM

16Gb: x16 TwinDie Single Rank DDR4 SDRAM
Current Specifications – Limits
22. Applicable for MR2 settings A7 = 1 and A7 = 0; manual mode with extended tempera-
ture range of operation (0–95°C).
23. Applicable for MR2 settings A7 = 0 and A7 = 1; manual mode with reduced temperature
range of operation (0–45°C).
24. I_DD6R and I_DD6A values are typical.
Table 10: x16 I_DD, I_PP, and I_DDQ Current Limits – Rev. H
Symbol
DDR4-2133¹ DDR4-2400
I_DD0: One bank ACTIVATE-to-PRECHARGE
TBD
TBD
current
I_PP0: One bank ACTIVATE-to-PRECHARGE I_PP
TBD
TBD
current
I_DD1: One bank ACTIVATE-to-READ-to-PRE-
TBD
TBD
CHARGE current
I_DD2N: Precharge standby current
TBD
TBD
DDR4-2666
TBD
TBD
TBD
TBD
DDR4-2933
TBD
TBD
TBD
TBD
I_DD2NT: Precharge standby ODT current
I_DD2P: Precharge power-down current
I_DD2Q: Precharge quiet standby current
I_DD3N: Active standby current
I_PP3N: Active standby I_PP current
I_DD3P: Active power-down current
I_DD4R: Burst read current
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
I_DD4W: Burst write current
TBD
TBD
TBD
TBD
I_DD5B: Burst refresh current (1X REF)
I_PP5B: Burst refresh I_PP current (1X REF)
I_DD6N: Self refresh current; 0–85°C
I_DD6E: Self refresh current; 0–95°C
I_DD6R: Self refresh current; 0–45°C
I_DD6A: Auto self refresh current (25°C)
I_DD6A: Auto self refresh current (45°C)
I_DD6A: Auto self refresh current (75°C)
I_DD7: Bank interleave read current
I_PP7: Bank interleave read I_PP current
I_DD8: Maximum power-down current
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
Unit
mA
Notes
2, 3, 4
mA
mA
3, 4, 5
mA 4, 6, 7, 8,
9, 10, 11
mA
4, 11
mA
4, 11
mA
4, 11
mA
4, 11
mA
mA
4, 11
mA 4, 14, 13,
11
mA 4, 11, 15,
16, 17,
18
mA 4, 19, 20
mA
mA
11, 21
mA
11, 22
mA 11, 23,
24
mA
11, 24
mA
11, 24
mA
11, 24
mA
4
mA
mA
11
Notes:
1. DDR4-1600 and DDR4-1866 use the same I_DD limits as DDR4-2133.
2. When additive latency is enabled for I_DD0, current changes by approximately 0%.
3. I_PP0 test and limit is applicable for I_DD0 and I_DD1 conditions.
09005aef86573aa8
DDR4_16Gb_x16_1CS_TwinDie.pdf - Rev. E 12/16 EN
15
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.