|
N25Q032A13ESE40F Datasheet, PDF (1/82 Pages) Micron Technology – SPI-compatible serial bus interface | |||
|
32Mb, 3V, Multiple I/O Serial Flash Memory
Features
Micron Serial NOR Flash Memory
3V, Multiple I/O, 4KB Sector Erase
N25Q032A13E1240x, N25Q032A13ESE40x, N25Q032A13EF640x,
N25Q032A13EF840x, N25Q032A13ESF40x, N25Q032A13ESC40x,
N25Q032A13EF440E, N25Q032A13EF440F, N25Q032A13ESCA0F
N25Q032A13ESFA0F, N25Q032A13ESFH0F
Features
⢠SPI-compatible serial bus interface
⢠108 MHz (MAX) clock frequency
⢠2.7â3.6V single supply voltage
⢠Dual/quad I/O instruction provides increased
throughput up to 432 MHz
⢠Supported protocols
â Extended SPI, dual I/O, and quad I/O
⢠Execute-in-place (XIP) mode for all three protocols
â Configurable via volatile or nonvolatile registers
â Enables memory to work in XIP mode directly af-
ter power-on
⢠PROGRAM/ERASE SUSPEND operations
⢠Continuous read of entire memory via a single com-
mand
â FAST READ
â QUAD or DUAL OUTPUT FAST READ
â QUAD or DUAL I/O FAST READ
⢠Flexible to fit application
â Configurable number of dummy cycles
â Configurable output buffer
â RESET function available upon customer request
⢠64-byte, user-lockable, one-time programmable
(OTP) dedicated area
⢠Erase capability
â Subsector erase 4KB uniform granularity blocks
â Sector erase 64KB uniform granularity blocks
â Full-chip erase
⢠Write protection
â Software write protection applicable to every
64KB sector via volatile lock bit
â Hardware write protection: protected area size
defined by four nonvolatile bits (BP0, BP1, BP2,
and TB)
â Additional smart protections, available upon re-
quest
⢠Electronic signature
â JEDEC-standard, 2-byte signature (BA16h)
â Unique ID code: 17 read-only bytes, including:
⢠Two additional extended device ID bytes to
identify device factory options
⢠Customized factory data (14 bytes)
⢠Minimum 100,000 ERASE cycles per sector
⢠More than 20 years data retention
⢠Packages (JEDEC-standard, RoHS compliant)
â F4 = U-PDFN-8 4mm x 3mm (MLP8)
â F6 = V-PDFN-8 6mm x 5mm (MLP8)
â F8 = V-PDFN-8 8mm x 6mm (MLP8)
â 12 = T-PBGA-24b05 6mm x 8mm
â SC = SOP2-8 150 mils body width (SO8N)
â SF = SOP2-16 300 mils body width (SO16W)
â SE = SOP2-8 208 mils body width (SO8W)
PDF: 09005aef84566622
n25q_32mb_3v_65nm.pdf - Rev. G 9/12 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
|
▷ |