|
MT18LSDT12872AG Datasheet, PDF (1/29 Pages) Micron Technology – Synchronous DRAM Module | |||
|
512MB (SR), 1GB (DR): (x72, ECC) 168-Pin SDRAM UDIMM
Features
Synchronous DRAM Module
MT9LSDT6472A - 512MB
MT18LSDT12872A - 1GB
For the latest data sheet, refer to Micronâs Web site: www.micron.com/products/modules.
Features
⢠PC100- and PC133-compliant
⢠168-pin, dual in-line memory module (DIMM)
⢠Unbuffered, ECC-optimized pinout
⢠512MB (64 Meg x 72) and 1GB (128 Meg x 72)
⢠Single +3.3V power supply
⢠Fully synchronous; all signals registered on positive
edge of system clock
⢠Internal pipelined operation; column address can
be changed every clock cycle
⢠Internal SDRAM banks for hiding row access/
precharge
⢠Programmable burst lengths: 1, 2, 4, 8, or full page
⢠Auto precharge, includes concurrent auto
precharge, and auto refresh modes
⢠Self refresh mode
⢠64ms, 8,192-cycle refresh
⢠LVTTL-compatible inputs and outputs
⢠Serial presence-detect (SPD)
⢠Gold edge contacts
Table 1:
Timing Parameters
CL = CAS (READ) latency
Access Time
Module Clock
Setup
Marking Frequency CL = 2 CL = 3 Time
-13E
-133
133 MHz 5.4ns â
1.5
133 MHz
â
5.4ns 1.5
Hold
Time
0.8
0.8
Figure 1: 168-Pin DIMM (MO-161)
Standard 1.375in./34.93mm
Low Profile 1.125in./28.58mm
Options
⢠Package
168-pin DIMM (standard)
168-pin DIMM (lead-free)
⢠Frequency/CAS latency
7.5ns (133 MHz)/CL = 2
7.5ns (133 MHz)/CL = 3
⢠PCB
Standard (1.375in./34.93mm)
Low-Profile (1.125in./28.58mm)
Marking
G
Y1
-13E
-133
See note 1 on
page 2
See note 1 on
page 2
Notes: 1. Contact Micron for product availability.
Table 2: Address Table
Parameter
Refresh Count
Device Banks
Device Configuration
Row Addressing
Column Addressing
Module Ranks
512MB
8K
4 (BA0, BA1)
512Mb (64 Meg x 8)
8K (A0âA12)
2K (A0âA9, A11)
1 (S0#, S2#)
1GB
8K
4 (BA0, BA1)
512Mb (64 Meg x 8)
8K (A0âA12)
2K (A0âA9, A11)
2 (S0#, S2#; S1#, S3#)
PDF: 09005aef8088b1bf/Source: 09005aef808807ca
SD9_18C64_128X72AG.fm - Rev. C 6/05 EN
1
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2002 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
|
▷ |