|
MT16VDDF12864HG Datasheet, PDF (1/15 Pages) Micron Technology – DDR SDRAM SODIMM | |||
|
512MB, 1GB (x64, DR) 200-Pin DDR SODIMM
Features
DDR SDRAM SODIMM
MT16VDDF6464H â 512MB
MT16VDDF12864H â 1GB
For component data sheets, refer to Micronâs Web site: www.micron.com
Features
⢠200-pin, small-outline dual in-line memory module
(SODIMM)
⢠Fast data transfer rates: PC2100, PC2700, and PC3200
⢠512MB (64 Meg x 64) and 1GB (128 Meg x 64)
⢠VDD = VDDQ = +2.5V
(-40B: VDD = VDDQ = +2.6V)
⢠VDDSPD = +2.3V to +3.6V
⢠2.5V I/O (SSTL_2-compatible)
⢠Internal, pipelined double data rate (DDR)
2n-prefetch architecture; two data accesses per clock
cycle
⢠Bidirectional data strobe (DQS) transmitted/received
with dataâthat is, source-synchronous data capture
⢠Differential clock inputs CK and CK#
⢠Multiple internal device banks for concurrent
operation
⢠Dual rank
⢠Programmable burst lengths (BL): 2, 4, or 8
⢠Auto precharge option
⢠Auto refresh and self refresh modes: 7.8125µs
maximum average periodic refresh interval
⢠Serial presence-detect (SPD) with EEPROM
⢠Selectable CAS latency (CL) for maximum
compatibility
⢠Gold edge contacts
200-Pin SODIMM Figures
Figure 1: 512MB 200-Pin SODIMM (MO-244)
PCB height: 31.75mm (1.25in)
Figure 2: 1GB 200-Pin SODIMM (MO-244)
PCB height: 31.75mm (1.25in)
Options
Marking
⢠Self refresh current
â Standard
â Low power1
None
L
⢠Operating temperature
â Commercial (0°C ⤠TA ⤠+70°C)
â Industrial (â40°C ⤠TA ⤠+85°C)
⢠Package
None
I
â 200-pin DIMM (standard)
G
â 200-pin DIMM (Pb-free)2
Y
⢠Memory clock, speed, CAS latency
â 5.0ns (200 MHz), 400 MT/s, CL = 3
-40B
â 6.0ns (167 MHz), 333 MT/s, CL = 2.5
â 7.5ns (133 MHz), 266 MT/s, CL = 2.52
-335
-265
Notes: 1. See Table 9 on page 10 , Table 10 on page 11,
or Table 11 on page 12 for low power values.
2. Contact Micron for product availability.
PDF: 09005aef80a77a90/Source: 09005aef80a646bc
DDF16C64_128x64_L_H.fm - Rev. G 8/08 EN
1
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2003 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
|
▷ |