MT16KTF1G64HZ Datasheet, PDF (1/21 Pages) Micron Technology – 1.35V DDR3L SDRAM SODIMM

4GB, 8GB (x64, DR) 204-Pin 1.35V DDR3L SODIMM
Features
1.35V DDR3L SDRAM SODIMM
MT16KTF51264HZ – 4GB
MT16KTF1G64HZ – 8GB
Features
• DDR3L functionality and operations supported as
defined in the component data sheet
• 204-pin, small outline dual in-line memory module
(SODIMM)
• Fast data transfer rates: PC3-14900, PC3-12800, or
PC3-10600
• 4GB (512 Meg x 64), 8GB (1 Gig x 64)
• V_DD = 1.35V (1.283V–1.45V)
• V_DD = 1.5V (1.425–1.575V)
• Backward compatible to V_DD = 1.5V ±0.075V
• V_DDSPD = 3.0–3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Dual rank
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• On-board I²C serial presence-detect (SPD) EEPROM
• Selectable BC4 or BL8 on-the-fly (OTF)
• Gold edge contacts
• Halogen-free
• Fly-by topology
• Terminated control, command, and address bus
Figure 1: 204-Pin SODIMM (MO-268 R/C-F,
R/C-F3)
Module height: 30mm (1.181in)
Options
• Operating temperature
– Commercial (0°C ≤ T_A ≤ +70°C)
• Package
– 204-pin DIMM (halogen-free)
• Frequency/CAS latency
– 1.07ns @ CL = 13 (DDR3-1866)
– 1.25ns @ CL = 11 (DDR3-1600)
– 1.5ns @ CL = 9 (DDR3-1333)
Marking
None
Z
-1G9
-1G6
-1G4
Table 1: Key Timing Parameters
Speed Industry
Grade Nomenclature
-1G9
PC3-14900
-1G6
PC3-12800
-1G4
PC3-10600
-1G1
PC3-8500
-1G0
PC3-8500
-80B
PC3-6400
CL =
13
1866
–
–
–
–
–
CL =
11
1600
1600
–
–
–
–
Data Rate (MT/s)
CL =
10 CL = 9 CL = 8 CL = 7
1333 1333 1066 1066
1333 1333 1066 1066
1333 1333 1066 1066
–
–
1066 1066
–
–
1066
–
–
–
–
–
CL = 6
800
800
800
800
800
800
CL = 5
667
667
667
667
667
667
t_RCD
(ns)
13.125
13.125
13.125
13.125
15
15
t_RP
(ns)
13.125
13.125
13.125
13.125
15
15
t_RC
(ns)
47.125
48.125
49.125
50.625
52.5
52.5
PDF: 09005aef846206a0
ktf16c512_1gx64hz.pdf - Rev. K 7/15 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.