M1000 Datasheet, PDF (6/6 Pages) GSI Group, Inc. – Mercury TM1000 Analog Output Encoder Systems For Customer Interpolation- Resolution to 0.078μm

Standard Rotary Scales
HUB THICKNESS
SCALE
PATTERN
SCALE O.D.
MOUNTING
HOLES
Key: inches[mm]
Model No. Scale Outer
Diameter
R1206
R1910
R3213
R5725
R10851
0.472 [12.00]
0.750 [19.05]
1.250 [31.75]
2.250 [57.15]
4.250 [107.95]
HUB I.D.
OPTICAL DIAMETER
Specifications
Material
Soda lime glass
Typical CTE
8ppm/°C
Scale Inner
Diameter
0.250 [6.35]
0.375 [9.52]
0.500 [12.70]
1.000 [25.40]
2.000 [50.80]
Optical
Diameter
0.413 [10.50]
0.627 [15.92]
1.027 [26.08]
2.053 [52.15]
4.106 [104.30]
Hub Inner
Diameter
+.0005/-0.0000
0.1253 [3.18]
0.1253 [3.183]
0.2503 [6.358]
0.5003 [12.708]
1.0003 [25.408]
Custom scales available
Hub
Fundamental
Thickness
CPR
0.040 [1.02]
0.040 [1.02]
0.050 [1.27]
0.060 [1.52]
0.080 [2.03]
1650
2500
4096
8192
16384
How to Order Mercury 1000 Encoder Systems
To specify your Mercury encoder with the desired scale, cable length and software, consult the chart below to create the correct part
number for your order. Call MicroE Systems’ Rapid Customer Response team for more information [508] 903-5000.
Example (Linear Encoder): M1000-M05-L55-C1
Example (Rotary Encoder): M1000-M10-R1910-HA
M1000 - Cable Length - Scale Model - Scale Mounting
M05 = 0.5 m
M10 = 1.0 m
M20 = 2.0 m
Lxxx or Rxxxx
For linear scales:
T = Tape mounting
C1 = 3 scale clamps*
C2 = 10 scale clamps**
Hubs for Rotary Scales:
NH = Without Hub
HE = for R1206
HA = for R1910
HB = for R3213
HC = for R5725
HD = for R10851
* 3 clamps for linear scales up to 130mm
** 10 clamps for linear scales 155mm or longer
How to Order SmartPrecision Alignment
Required for M1000 setup
Example: Alignment Tool for Mercury 1000 encoder, 120 VAC = SSAT1000-120
SSAT1000 – Voltage
120 = 120 VAC, 60Hz US Std. 2-prong plug
220 = 220 VAC, 50Hz European Std. 2-prong plug
How to Order SmartPrecision Software
Optional for SSAT1000 Alignment Tool
SmartPrecision Software
SSWA-AT = SmartPrecision software on CD
All Specifications are subject to change. All
data is accurate to the best of our knowledge.
MicroE Systems is not responsible for errors.
MicroE Systems – World Headquarters: 125 Middlesex Turnpike • Bedford • MA 01730
DS-M1000 Rev G © 2008 MicroE Systems _{www.microesys.com • [e-mail] • T. [781]-266-5700 • F. [781]-266-5112}
Page 6