WRN72XX-2000 Datasheet, PDF (4/4 Pages) Microdc power Technology Co., Ltd – WIDEINPUTNON-ISOLATED & REGULATED SINGLEOUTPUT

WRN72XX-2000(B)&WRN73XX-3000(B)&WRN74XX-4000(B) Series
OUTLINE DIMENSIONS & FOOTPRINT DETAILS
MECHANICAL DIMENSIONS
RECOMMENDED FOOTPRINT
Pin Connections
Pin
Name
Description
1
ON/OFF Input pin :Active low (less than 0.8V) to disable the device
2.3.4
Vin
Power input
5.6.7.8
GND
Input and output ground (common)
9.10.11
Vout
Power output
12
Vout-Adj With external resistors R1,R2 to selected output voltage
Tolerance: ± 0.25 mm
Note:
Unit:mm[inch]
Pin section tolerances: ±0.10mm[±0.004inch]
General tolerances: ±0.25mm[±0.010inch]
TUBE OUTLINE DIMENSIONS
WRN72XX-2000
WRN72XX-2000B
Note:
Unit:mm[inch]
Pin section tolerances: ±0.10mm[±0.004inch]
General tolerances: ±0.25mm[±0.010inch]
Note:
Note:
Unit :mm[inch]
General tolerances:±0.50mm[±0.020inch]
L=530mm[20.866inch] Devices per tube quantity: 15pcs
L=220mm[8.661inch] Devices per tube quantity: 6pcs
Short tube inner packaging dimensions: L*W*H=255*170*80mm
Short tube outer packaging dimensions(with six inner packaging boxes):
L*W*H=375*280*270mm
Long tube inner packaging dimensions: L*W*H=580*200*100mm
Long tube outer packaging dimensions(with two inner packaging boxes):
L*W*H=600*215*220mm
Long tube outer packaging dimensions(with three inner packaging boxes):
L*W*H=600*215*325mm
1.All specifications measured at Ta=25℃, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
2. Only typical models listed, other models may be different, please contact our technical person for more details.
3. In this data sheet, all the test methods of indications are based on corporate standards.
http://www.microdc.cn Technical Enquiries-Email:[e-mail] Tel:[phone] Page 4 of 4