|
WRN78XX-1000 Datasheet, PDF (1/2 Pages) Microdc power Technology Co., Ltd – WIDEINPUT,NON-ISOLATED REGULATED SINGLEOUTPUT SIP3DC/DCCONVERTER | |||
|
WRN78XX-1000 Series
WIDE INPUT,NON-ISOLATED REGULATED SINGLE OUTPUT SIP3 DC/DC CONVERTER
FEATURES
âRoHS compliant
âEfficiency up to 96%
âSIP Package
âWide temperature range:-40°C to 85°C
âShort circuit protection,Thermal Shutdown
âNo heatsink required
â Low ripple and noise
â Industry standard pinout
âMTBF>2,000,000 hours
âOnly two extra capacitors are required
â Input voltage range can be lower than the
output voltage for higher output voltages
in negative application
MODEL SELECTION
WRN78â 05â¡-1000â¢
â Product Series
â¢Output Current
â¡Output Voltage
SELECTION GUIDE
order code
Input
Voltage Range
(VDC)
Output
Voltage
(VDC)
Current
(MA)
Efficiency(%,Typ)
Vin(min)
Vin(max)
4.75-28
3.3
1000
90
83
WRN7803-1000
4.75-25
-3.3
-600
80
82
6.5-32
5.0
1000
93
88
WRN7805-1000
7.0-27
-5.0
-600
85
87
WRN786.5-1000
9-32
6.5
1000
94
90
7.0-25
-6.5
-400
88
90
12-32
9.0
1000
95
92
WRN7809-1000
7.0-23
-9.0
-400
89
91
WRN7812-1000
16-32
12
1000
96
94
7.0-20
-12
-300
89
91
*Input voltage can't exceed this value,or will cause the permanent damage.
OUTPUT SPECIFICATIONS
Parameter
Test conditions
Output Voltage accuracy 100% full load
Line regulation
Vin= min. to max. at full load
Load regulation
10% to 100% load
Rippleï¼Noise*
20MHZ Bandwidth
Short Circuit Input Power
Short circuit protection
Switching frequency
100% full load
Quiescent current
Positive Output
Quiescent current
Negative Output
Thermal Shutdown
Internal IC junction
Output Current Limit
Temperature coefficient
-40 °C to +85 °C ambient
Max capacitance load
* Test ripple and noise by "parallel cable" method.
Min.
Typ.
Max.
Units
±2
±3
%
±0.2 ±0.4
%
±0.4 ±0.6
%
25
35
%
0.5
1.8
W
Continuous, automatic recovery
280
330
450
Khz
5
8
mA
7
13
150
â
2000
mA
0.02
%/â
1000
µF
DESCRIPTION
The WRN78xx-1000 Series high efficiency switching
Regulators are ideally suited to replace WRN78xx linear
regulators and are pin compatible. The efficiency of up
to 96% means that very little energy is wasted as heat
so there is no need fo any heat sinks with their additional
space and mounting costs.
MICRODC reserves the copyright
COMMON SPECIFICATIONS
Parameter
Operating Temp. Range
Operating Case Temp.
Storage Temp. Range
Cooling
Case Material
Lead Temperature
Storage Humidity Range
MTBF
Package Weight
Note:
Test conditions
1.5mm from case for 10 seconds
+25°C MIL-HDBK-217F
Min.
-40
-55
2000
Typ.
Max. Units
85
â
100
â
125
â
Free Air Convection
Plastic (UL94-V0)
300
â
95
%
K hours
3.7
g
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output
load unless otherwise specified.
2. Only typical models listed. If you need other model, please confirm the power, input voltage and output voltage,
then phone us.
http://www.microdc.cn Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646 Page 1 of 2
|
▷ |