|
WRB-YQD-30W Datasheet, PDF (1/3 Pages) Microdc power Technology Co., Ltd – 30W,WIDEINPUT, ISOLATED®ULATEDSINGLEOUTPUTDC-DCCONVERTER | |||
|
WRB-YQD-30W Series
30W, WIDE INPUT, ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER
FEATURES
âWide 2:1 DC input range
âIn/out capacitance1000pF
âProtections : Short circuit / Overload /
Over voltage
â1000VDC I/O isolation for D/D
âCooling by free air convection
âBuilt-in remote ON-OFF control
â100% full load burn-in test
âFixed switching frequency at 225KHz
âLost cost
âMTBF>1000Khours
âHigh reliability
â1 year warranty
MODEL SELECTION
WRBâ 12â¡12â¢Yâ£QDâ¤-30Wâ¥
â Product Series â¡Input Voltage
â¢Output Voltage â£Wide (2:1) Input Range
â¤DIP Package Style â¥Rated Power
APPLICATIONS
The WRB-YQD-30W Series series of DC/DC
converters has been designed for a wide range of
applications including communications, industrial systems
and battery powered mobile equipments. Key features are
high power density (12W in a 2âx1âx 0.4â package) and
ultrawide input ranges of 9 â 36 VDC and 18 â75 VDC.
Other features of this converter are internal filtering
according to EN 55022, level A, safety approval to EN
60950 and UL 1950, wide operating temperature range
and remote on/off (opt.).
MICRODC reserves the copyright
SELECTION GUIDE
Order code
Input voltage
range
WRB1203YQD-5000
WRB1205YQD-5000
WRB1212YQD-2100
WRB1215YQD-1700
WRB2403YQD-5000
WRB2405YQD-5000
WRB2412YQD-30W
WRB2415YQD-30W
WRB4803YQD-5000
WRB4805YQD-5000
WRB4812YQD-30W
WRB4815YQD-30W
9.2 ~ 18 VDC
9.2 ~ 18 VDC
9.2 ~ 18 VDC
9.2 ~ 18 VDC
18~ 36 VDC
18~ 36 VDC
18~ 36 VDC
18~ 36 VDC
36~ 72 VDC
36~ 72 VDC
36~ 72 VDC
36~ 72 VDC
Output voltage
3.3VDC
5VDC
12VDC
15VDC
3.3VDC
5VDC
12VDC
15VDC
3.3VDC
5VDC
12VDC
15VDC
Output
current max.
5000mA
5000mA
2100mA
1700mA
5000mA
5000mA
2500mA
2000mA
5000mA
5000mA
2500mA
2000mA
Efficiency typ.
77
77
80
80
79
79
82
83
80
80
84
85
SPECIFICATION
INPUT
PROTECTION
FUNCTION
ENVIRONMENT
SAFETY &EMC
(Note 6)
OTHERS
NOTE
DC CURRENT
12S:3.6A 24S:2A 48S:1A
IDLE CURRENT
12S:35mA 24S/48S:30mA
OVERLOAD
Above 105% rated output power
Protection type : Over power limiting, recovers automatically
after fault condition is removed
OVER VOLTAGE
WRBXX03:3.8 ~
WRBXX12:13.8 ~ 18V
WRBXX05:5.75 ~ 7.5V
WRBXX15:17.25 ~ 22.5V
SHORT CIRCUIT
ON/OFF CONTROL
Protection type : Shut off o/p voltage, clamping by zener
Protection type : Constant current limiting, recovers
automatically after fault condition is removed
Logic "1" or open: power on
power off
Logic "0" short to Vin-:
WORKING TEMP.
STORAGE TEMP.,
HUMIDITY
TEMP.
COEFFICIENT
SAFETY
STANDARDS
ISOLATION
VOLTAGE
ISOLATION
RESISTANCE
EMI CONDUCTION
& RADIATION
EMS IMMUNITY
MTBF
-25 ~ +85â (Refer to output load derating curve)
-25 ~ +85â, 0 ~ 95% RH
±0.03%/ âï¼0~50âï¼
Design refer to LVD
I/P-O/P:1KVDC
I/P-O/P:100M Ohms/500VDC
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-2,3,4,6,8; ENV50204, EN55024,
light industry level,criteria A
322.4K hrs min.
MIL-HDBK-217F (25â)
DIMENSION
50.8*50.8*16mm (2"*2"*0.63") (L*W*H)
PACKING
0.1Kg; 150pcs/15.8Kg/0.97CUFT
1. All parameters NOT specially mentioned are measured at 12,24,48VDC input,
rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted
pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Short circuit not more than 60 second.
5. DC source wires 5cm, an input external al capacitor 47 ~ 100uF is required.
6. The power supply is considered a component which will be installed into a final
equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
http://www.microdc.cn Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646 page 1/3
|
▷ |