MB-XMD-1W5 Datasheet, PDF (1/2 Pages) Microdc power Technology Co., Ltd – 1000VDCIsolated 1.5Wsingle output (1"×1")DIP Converters

MB-XMD-1W5 Series
1000VDC Isolated 1.5W single output (1"×1")DIP Converters
FEATURES
◆1.5 WATTS REGULATED OUTPUT POWER
◆LOW OUTPUT RIPPLE & NOISE
◆PI TYPE INPUT FILTER
◆1000VDC ISOLATION VOLTAGE
◆HIGH EFFICIENCY UP TO 78%
◆STANDARD (1"×1") DIP PACKAGE
◆FIVE-SIDED EMI SHIELD
MODEL SELECTION
MB^①05^②05^③-X^④MD^⑤-1W5^⑥
①Product Series
②Intput Voltage
③Output Voltage
④Fixed Input
⑤(1"×1")DIP Package Style ⑥Rated Power
APPLICATIONS
The MB-XMD-1W5 series offer 1.5 watts of output power from a
package in an IC compatible _1"×1" DIP configuration without
derating to 71℃ ambient temperature.MB-XMD-1W5 series have
input voltage of 4.5-5.5,10.8-13.2,21.6-26.4&43.2-52.5VDC.
MB-XMD-1W5 features 1000VDC of isolation voltage. A safety
designed meet to EN60950-1 and UL60950-1. All models are
particularly suited to telecommunications, industrial, mobile telecom
and test equipment applications.
MICRODC reserves the copyright
OUTPUT SPECIFICATIONS
Output power
Voltage accuracy
Full load and nominal Vin
Minimum load
Line regulation
LL to HL at Full Load
Load regulation
25% to 100% FL
MB05 output
others
Cross regulation
Asymmetrical load 25% / 100% FL
Ripple and noise
20MHz bandwidth
Temperature coefficient
Short circuit protection
INPUT SPECIFICATIONS
Input voltage range
5V nominal input
12V nominal input
24V nominal input
48V nominal input
Input filter
1.5 Watts max
±4
0%
±0.3%
± 1.5
± 0.5
±5%
50mVp-p
±0.02% /℃, max
Short term
4.5 – 5.5VDC
10.8 – 13.2VDC
21.6 – 26.4VDC
43.2 – 52.5VDC
Pi type
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
1000VDC, min
Isolation resistance
10⁹ohms, min
Isolation capacitance
30pF, max
Switching frequency
20KHz, min
Design meet safety standard
IEC60950-1, UL60950-1,EN60950-1
Case material
Nickel-coated copper
Base material
Non-conductive black plastic
Potting material
Epoxy (UL94-V0)
Dimensions
1.00 X 1.00 X 0.40 Inch
(25.4 X 25.4 X 10 mm)
Weight
16g (0.55oz)
MTBF (Note 1)
ENVIRONMENTAL SPECIFICATIONS
5.531 x 10⁶ hrs
Operating temperature range
-25℃ ~ +71℃
Maximum case temperature
+100℃
Storage temperature range
-55℃ ~ +105℃
Thermal impedance
Nature convection
20℃/watt
Thermal shock
MIL-STD-810D
Vibration
10~55Hz, 10G, 30minutes along X,Y and Z
Relative humidity
EMC CHARACTERISTICS
5% to 95% RH
Conducted emissions
EN55022
Class A
Radiated emissions
EN55022
Class A
ESD
EN61000-4-2
Perf. Criteria
Radiated immunity
EN61000-4-3
Perf. Criteria
Fast transient
EN61000-4-4
Perf. Criteria B
Surge
EN61000-4-5
Perf. Criteria B
Conducted immunity
EN61000-4-6
Perf. Criteria A
http://www.microdc.cn Technical Enquiries-Email:[e-mail] Tel:[phone] Page 1 of 2