ID-XH30M-1W Datasheet, PDF (1/2 Pages) Microdc power Technology Co., Ltd – 1W,FIXED INPUT,3000VDCISOLATED & REGULATEDTWINOUTPUTDC-DCCONVERTER

ID-XH30M-1W Series
1W,FIXED INPUT,3000VDC ISOLATED & REGULATED TWIN OUTPUT DC-DC CONVERTER
PRODUCT PROGRAM
Part
Number
Input
Voltage(VDC)
Nominal
Range
ID050303XH30M-1W
5
4.5-5.5
Output (Vo1 & Vo2)
Voltage
(VDC)
Current(MA)
Max
Min.
3.3
100
10
Efficiency
(%,Typ)
62
ID050505XH30M-1W
5
4.5-5.5
05
152
15
64
FEATURES
◆Available inputs:5,12&24VDC
◆Available outputs:3.3&5VDC
◆SIP7 package
◆Temperature range: -40℃~+85℃
◆3KVDC isolation
◆No Heat sink required
◆No external component required
◆ Industry standard pinout
◆ RoHS Compliance
ID120303XH30M-1W
12
10.8-13.2
3.3
100
10
62
ID120505XH30M-1W
12
10.8-13.2
05
152
15
65
ID240303XH30M-1W
24
21.6-26.4
3.3
100
10
62
ID240505XH30M-1W
24
21.6-26.4
05
152
15
65
Electrical Specifications (Typical at +25℃, nominal input voltage, rated output current unless otherwise specified)
COMMON SPECIFICATIONS
Item
Storage humidity range
Operating temperature
Test Conditions
Storage temperature
Temp. rise at full load
Derating
See graph
Min.
-40
-55
Typ.
15
Max.
90
85
125
25
Units
%
℃
Short circuit protection*
1
S
MODEL SELECTION
Cooling
ID^①05^②05^③05^④X^⑤ H30^⑥M^⑦-1W^{⑧ Case material}
Free air convection
Plastic(UL94-V0)
①Product Series
②Input Voltage
Weight
2.5
g
③The 1st Output Voltage
④The 2nd Output Voltage
*Supply voltage must be discontinued at the end of short circuit duration.
⑤Fixed Input
⑥3KVDC isolation
⑦Mini SIP7 Package Style
⑧Rated Power
ISOLATION SPECIFICATIONS
APPLICATIONS
The ID-XH30M-1W Series are specially designed for
applications where a group of polar power supplies are
isolated from the input power supply in a distributed power
supply system on a circuit board.
These products apply to:
1) Where the voltage of the input power supply is fixed
(voltage variation ≤±10%);
2) Where isolation is necessary between input and
output (isolation voltage ≤3000VDC);
MICRODC reserves the copyright
Item
Rated voltage
Leakage current
Isolation resistance (Vin/Vout)
Isolation resistance (Vo1/Vo2)
Isolation capacitance(Vin/Vout)
Isolation capacitance(Vo1/Vo2)
Test Conditions
Tested for 1 minute and 1mA max
Test at 500VDC
Test at 500VDC
Min.
Typ.
3000
Max.
Units
VDC
1000
MΩ
1000
MΩ
80
pF
80
pF
OUTPUT SPECIFICATIONS
Item
Test Conditions
Output power
Line regulation
Load regulation
Efficiency
Output voltage accuracy
Temperature drift
Ripple & Noise*
Switching frequency
100% full load
20MHz Bandwidth
Full load, nominal input
*Test ripple and noise by "Parallel cable"method.
Min.
0.1
60
Typ.
45
Max.
1
±0.4
±0.3
75
±1
±0.02
50
Units
W
%
%
%
%
%/℃
mVp-p
KHz
http://www.microdc.cn Technical Enquiries-Email:[e-mail] Tel:[phone] Page 1 of 2