IB-XT-1W Datasheet, PDF (1/3 Pages) Microdc power Technology Co., Ltd – 1W,FIXED INPUT,ISOLATED & REGULATEDSINGLE OUTPUT,SMD DC-DCCONVERTER

IB-XT-1W&IB-NXT-1W Series
1W,FIXED INPUT,ISOLATED & REGULATED SINGLE OUTPUT,SMD DC-DC CONVERTER
FEATURES
◆Small Footprint
◆SMD Package Style
◆1kVDC Isolation
◆No Heatsink Required
◆Continuous Short Circuit Protection
◆Internal SMD Construction
◆Temperature Range: -40℃~ +85℃
◆Industry Standard Pinout
◆No External Component Require
◆RoHS Compliance
MODEL SELECTION
IB^①05^②12^③X^④T^⑤ -1W^⑥
①Product Series
③Output Voltage
⑤SMD Package Style
②Input Voltage
④Fixed input
⑥Rated Power
MODEL SELECTION
IB^①05^②12^③N^④X^⑤T^⑥ -1W^⑦
①Product Series
③Output Voltage
⑤Fixed input
⑦Rated Power
②Input Voltage
④No Pin
⑥SMD Package Style
APPLICATIONS
The IB-XT-1W&IB-NXT-1W series are specially designed
for applications where a group of polar power supplies are
isolated from the input power supply in a distributed power
supply system on a circuit board.
These products apply to:
1) Where the voltage of the input power supply is fixed
(voltage variation≤±5%);
2) Where isolation is necessary between input and output
(isolation voltage≤1000VDC);
3) Where the regulation of the output voltage and the
output ripple noise are not demanding.
PRODUCT PROGRAM
Part
Number
Input
Voltage(VDC)
Nominal
Range
IB0505XT-W75
5
4.75-5.25
IB0512XT-1W
5
4.75-5.25
IB0515XT-1W
5
4.75-5.25
IB1205XT-W75
12
11.4-12.6
IB1212XT-1W
12
11.4-12.6
IB1215XT-1W
12
11.4-12.6
IB0505NXT-W75
5
4.75-5.25
IB0512NXT-1W
5
4.75-5.25
IB0515NXT-1W
5
4.75-5.25
IB1205NXT-W75
12
11.4-12.6
IB1212NXT-1W
12
11.4-12.6
IB1215NXT-1W
12
11.4-12.6
Voltage
(VDC)
5
12
15
5
12
15
5
12
15
5
12
15
Output
Current(MA)
Max
Min.
150
15
83
9
67
7
150
15
83
9
67
7
150
15
83
9
67
7
150
15
83
9
67
7
Note: 1. IB-NXT-1W series have no 3,6,8,9 pin, for example IB0505NXT-W75.
Efficiency
(%,Typ)
68
69
69
68
69
70
68
69
69
68
69
70
COMMON SPECIFICATIONS
Item
Storage humidity
Operating temperature
Storage temperature
Temp. rise at full load
Lead temperature
Cooling
Short circuit protection
Package material
MTBF
Weight
Test Conditions
1.5mm from case for 10 seconds
Min.
Typ.
Max.
Units
95
%
-40
85
℃
-55
125
℃
15
25
℃
260
℃
Free air convection
Continuous
Epoxy Resin (UL94-V0)
3500
K hours
1.70
g
ISOLATION SPECIFICATIONS
Item
Test Conditions
Isolation voltage
Isolation resistance
Isolation capacitance
Tested for 1 minute and 1mA max
Test at 500VDC
Min.
Typ.
1000
1000
40
Max.
Units
VDC
MΩ
pF
MICRODC reserves the copyright
http://www.microdc.cn Technical Enquiries-Email:[e-mail] Tel:[phone] Page 1 of 3