H-XS-2W Datasheet, PDF (1/2 Pages) Microdc power Technology Co., Ltd – FIXED INPUT,ISOLATED&UNREGULATED Single∕Dual Output DC∕DC Converter

H-XS-2W&G-XS-2W Series
FIXED INPUT,ISOLATED&UNREGULATED Single∕Dual Output DC∕DC Converter
FEATURES
◆RoHS compliant
◆Efficiency up to 80%
◆SIP Package
◆Wide temperature performance at full
2 Watt load,-40°C to 85 °C
◆UL 94V-0 package material
◆No heatsink required
◆LOW Isolation Capacitance
◆Industry standard pinout
◆Power sharing on output
◆6KVDC isolation
◆Continuous Short Circuit Protection
◆Internal SMD construction
◆No external components required
◆Good dynamic feature
SELECTION GUIDE
Order code
Input
Voltage(VDC)
Nominal
Range
G0505XS-2W
G0509XS-2W
G0512XS-2W
G0515XS-2W
H0505XS-2W
H0509XS-2W
H0512XS-2W
H0515XS-2W
G1205XS-2W
G1209XS-2W
G1212XS-2W
G1215XS-2W
H1205XS-2W
H1209XS-2W
H1212XS-2W
H1215XS-2W
G2405XS-2W
G2409XS-2W
G2412XS-2W
G2415XS-2W
H2405XS-2W
H2409XS-2W
H2412XS-2W
H2415XS-2W
5
4.5-5.5
5
4.5-5.5
5
4.5-5.5
5
4.5-5.5
5
4.5-5.5
5
4.5-5.5
5
4.5-5.5
5
4.5-5.5
12
10.8-13.
12
10.8-13.
12
10.8-13.
12
10.8-13.
12
10.8-13.
12
10.8-13.
12
10.8-13.
12
10.8-13.
24
21.6-26.
24
21.6-26.
24
21.6-26.
24
21.6-26.
24
21.6-26.
24
21.6-26.
24
21.6-26.
24
21.6-26.
Voltage
(VDC)
±5
±9
±12
±15
5
9
12
15
±5
±9
±12
±15
5
9
12
15
±5
±9
±12
±15
5
9
12
15
ISOLATION SPECIFICATIONS
Output
Current
Max
Min
±200
±20
±111
±12
±83
±9
±67
±7
400
40
222
23
167
17
133
14
±200
±20
±111
±12
±83
±9
±67
±7
400
40
222
23
167
17
133
14
±200
±20
±111
±12
±83
±9
±67
±7
400
40
222
23
167
17
133
14
Efficiency
(%,Typ)
74
77
77
77
74
77
77
77
75
78
80
78
75
78
80
78
75
77
80
79
75
77
80
74
Switching
Frequency
(KHz,Typ)
84
81
82
83
180
150
84
83
82
83
180
150
80
85
87
84
180
150
82
80
78
80
180
150
MODEL SELECTION
H^①05^②05^③X^④ S^⑤-2W^⑥
①Product Series
③Output Voltage
⑤SIP Package
②Input Voltage
④Fixed Input
⑥Rated Power
APPLICATIONS
The H_XS-2W&G_XS-2W series are specially
designed for applications where a group of polar power
supplies are isolated from the input power supply in a
distributed power supply system on a circuit board.
These products apply to:
1) where the voltage of the input power supply is fixed
(voltage variation ≤±10%);
2) where isolation is necessary between input and
output (isolation voltage ≤6000VDC);
3) where the regulation of the output voltage and the
output ripple noise are not demanded.
Such as: purely digital circuits,ordinary low
frequency analog circuits,and 1GBT power device
driving circuits.
Parameter
Isolation test voltage
Isolation resistance
Isolation capacitance
Test conditions
Flash tested for 1 minute and 1mA
Test at Viso=500VDC(Vin/Vout)
Min.
6000
1000
Typ. Max Unit
VDC
MΩ
10
PF
OUTPUT SPECIFICATIONS
Parameter
Test conditions
Min Typ. Max Unit
Output power
0.2
2
W
Line regulation
For Vin change of ±1%
±1.2
Load regulation
10% to 100% full load(5V output)
10% to 100% full load(9V output)
10% to 100% full load(12V output)
10
15
8.3
15
%
6.8
15
10% to 100% full load(15V output)
6.3
15
Output voltage accuracy
See tolerance envelope graph
Temperature drift
100% full load
±0.03
%/°C
Output Ripple&Noise
20MHz Bandwidth
150
250 MV p-p
Switching frequency
Full load,nominal input
(5V input)
45
Khz
(12V/24v input)
50
* Test ripple and noise by "parallel cable" method. See detailed operation instructions at Testing of Power
Converter section, application notes.
Note: Dual output models unbalanced load: ±5%.
MICRODC reserves the copyright
http://www.microdc.cn Technical Enquiries-Email:[e-mail] Tel:[phone] Page 1 of 2