D-XM-1W Datasheet, PDF (1/3 Pages) Microdc power Technology Co., Ltd – 1W,FIXED INPUT,1000V ISOLATED & UNREGULATEDTWINOUTPUTDC-DCCONVERTER

D-XM-1W Series
1W,FIXED INPUT,1000V ISOLATED & UNREGULATED TWIN OUTPUT DC-DC CONVERTER
FEATURES
◆Small footprint
◆SIP6 package
◆Temperature range: -40℃~+85℃
◆1KVDC isolation
◆No Heat sink required
◆No external component required
◆Internal SMD Construction
◆ Industry standard pinout
◆ RoHS Compliance
PRODUCT PROGRAM
Part
Number
Input
Voltage(VDC)
Nominal
Range
D030505XM-1W
3.3
2.97-3.63
D050303XM-1W
5
4.5-5.5
D050505XM-1W
5
4.5-5.5
Voltage
(VDC)
5
3.3
5
Output
Current(MA)
Max
Min.
100
10
152
15
100
10
Efficiency
(%,Typ)
70
62
71
COMMON SPECIFICATIONS
Item
Storage humidity range
Test Conditions
Operating temperature
Storage temperature
Lead temperature
1.5mm from case for 10 seconds
Min.
Typ.
Max.
Units
95
%
-40
85
-55
125
℃
300
MODEL SELECTION
D^①05^②05^③05^④X^⑤ M^⑥-1W^⑦
①Product Series
②Input Voltage
③The 1st Output Voltage ④The 2nd Output Voltage
⑤Fixed Input
⑥Mini SIP Package Style
⑦Rated Power
APPLICATIONS
The D-XM-1W Series are specially designed for
applications where a group of polar power supplies are
isolated from the input power supply in a distributed power
supply system on a circuit board.
These products apply to:
1) Where the voltage of the input power supply is fixed
(voltage variation ≤±10%);
2) Where isolation is necessary between input and
output (isolation voltage ≤1000VDC);
3) Where the regulation of the output voltage and the
output ripple noise are not demanding.
Such as:purely digital circuits, ordinary low frequency
analog circuits,and IGBT power device driving circuits.
Temp. rise at full load
15
25
Short circuit protection*
1
S
Cooling
Free air convection
Case material
Plastic(UL94-V0)
MTBF
1.4
g
Weight
3500
K hours
*Supply voltage must be discontinued at the end of short circuit duration.
ISOLATION SPECIFICATIONS
Item
Isolation voltage (Vin/Vout)
Isolation voltage (Vo1/Vo2)
Isolation resistance (Vin/Vout)
Isolation resistance (Vo1/Vo2)
Isolation capacitance(Vin/Vout)
Isolation capacitance(Vo1/Vo2)
Test Conditions
Tested for 1 minute and 1mA max
Tested for 1 minute and 1mA max
Test at 500VDC
Test at 500VDC
Min.
Typ.
1000
1000
1000
1000
30
30
Max.
Units
VDC
VDC
MΩ
MΩ
pF
pF
MICRODC reserves the copyright
http://www.microdc.cn Technical Enquiries-Email:[e-mail] Tel:[phone] Page 1 of 3