2D-XS Datasheet, PDF (1/2 Pages) Microdc power Technology Co., Ltd – FIXED INPUT,ISOLATED&UNREGULATED Twin Output DC∕DC Converter

2D-XS Series
FIXED INPUT,ISOLATED&UNREGULATED Twin Output DC∕DC Converter
FEATURES
◆RoHS compliant
◆Efficiency up to 85%
◆SIP Package
◆Wide temperature performance at full 2 Watt
load,-40°C to 85 °C
◆UL 94V-0 package material
◆No heatsink required
◆Low ripple and good EMC features
◆Industry standard pinout
◆Power sharing on output
◆1KVDC isolation
◆Continuous Short Circuit Protection
◆Internal SMD construction
◆No external components required
◆Good dynamic feature
MODEL SELECTION
2D^①05^②05^③05^④X^⑤ S^⑥
①Product Series
③Output Voltage1
⑤Fixed Input
②Input Voltage
④Output Voltage2
⑥SIP Package
SELECTION GUIDE
Order code
Input
Voltage(VDC)
Nominal
Range
2D050505XS
5
4.5-5.5
2D050909XS
5
4.5-5.5
2D051212XS
5
4.5-5.5
2D051515XS
5
4.5-5.5
2D120505XS
12
10.8-13
2D120909XS
12
10.8-13
2D121212XS
12
10.8-13
2D121515XS
12
10.8-13
2D240505XS
24
21.6-26
2D240909XS
24
21.6-26
2D241212XS
24
21.6-26
2D241515XS
24
21.6-26
Voltage
(VDC)
5
9
12
15
5
9
12
15
5
9
12
15
Output
Current
Max
Min
200
20
111
12
83
9
67
7
200
20
111
12
83
9
67
7
200
20
111
12
83
9
67
7
Efficiency
(%,Typ)
80
82
82
83
80
83
85
83
81
82
84
84
Switching
Frequency
(KHz,Typ)
84
81
82
83
180
150
84
83
82
83
83
80
ISOLATION SPECIFICATIONS
Parameter
Test conditions
Isolation test voltage
Isolation resistance
Isolation capacitance
Flash tested for 1 minute and 1mA max(Vin/Vout)
Flash tested for 1 minute and 1mA max(V01/V02)
Test at Viso=500VDC(Vin/Vout)
Test at Viso=500VDC(V01/V02)
(Vin/Vout)
(V01/V02)
Min.
1000
1000
1000
1000
Typ.
90
90
Max.
Unit
VDC
VDC
MΩ
MΩ
PF
PF
APPLICATIONS
The 2D-XS series are specially designed for
applications where a group of polar power supplies are
isolated from the input power supply in a distributed
power supply system on a circuit board.
These products apply to:
1) where the voltage of the input power supply is fixed
(voltage variation ≤±10%);
2) where isolation is necessary between input and
output (isolation voltage ≤1000VDC);
3) where the regulation of the output voltage and the
output ripple noise are not demanded.
Such as: purely digital circuits,ordinary low frequency
analog circuits,and 1GBT power device driving circuits.
MICRODC R ESERVES THE COPYRIGHT
OUTPUT SPECIFICATIONS
Parameter
Test conditions
Min Typ. Max Unit
Output power
2
W
Line regulation
For Vin change of ±1%
±1.2
10% to 100% full load(5V output)
12.8
15
Load regulation
10% to 100% full load(9V output)
10% to 100% full load(12V output)
8.3
10
%
6.8
10
10% to 100% full load(15V output)
6.3
10
Output voltage accuracy
See tolerance envelope graph
Temperature drift
100% full load
0.03
%/°C
Output Ripple&Noise*
20MHz Bandwidth
100
150 MV p-p
Switching frequency
Full load,nominal input
70
Khz
* Test ripple and noise by "parallel cable" method. See detailed operation instructions at Testing of Power
Converter section, application notes.
http://www.microdc.cn Technical Enquiries-Email:[e-mail] Tel:[phone] Page 1 of 2