CC1A-T1AH Datasheet, PDF (2/2 Pages) MICORO CRYSTAL SWITZERLAND – AT Crystal 8 MHz -24 MHz

STANDARD FREQUENCIES:
ENVIRONMENTAL
CHARACTERISTICS:
TERMINATIONS AND
PROCESSING:
PRODUCT DESCRIPTION AND
ORDERING INFORMATION:
8.0000
14.3181
Frequency
MHz
10.0000 10.1506 11.0592 12.0000 12.288
14.7456 16.0000 16.3840 18.432 20.0000
Other frequencies from
8 MHz up to 24 MHz on request
13.56
24.0000
Storage temp. range
TD Operating temperature range
TG Operating temperature range
Shock resistance
Vibration resistance
Conditions
–55 to +125°C
–55 to +175°C
–55 to +200°C
10000 g, 0.3 ms, ½ sine
40 g / 10–2000 Hz
Type
CC1A-T1AH
Only avaible with TD
temperature range
CC1A-T3AH
Termination
For SMD mounting
Au plated pads
For SMD mounting
Sn/Ag/Cu plated
Processing
Reflow soldering
+260°C / 20 s max.
Reflow soldering
+260°C / 20 s max.
CC1A–T1AH 24.0 MHz 20.0pF +/-50ppm TD QI
Frequency FL
CL Load Capacitance
16.0 pF
20.0 pF
Frequency tolerance
+/- 50 ppm
+/- 100 ppm
Optional:
if not defined,
‚Standard‘ will apply
Temperature Range
TD = - 55 to +175°C
TG = - 55 to +200°C
Qualification
QI = Industrial (Standard)
QS = Custom Specification
A unique part number will be generated for each product specification, i.e:
20xxxx-ML01
1'000 pcs (in 16mm tape on 7" reel)
20xxxx-PL02
2'000 pcs (in 16mm tape on 13" reel)
20xxxx-DA00
xxx pcs (in foam tray)
Please contact us.
All specifications subject to change without notice.
Micro Crystal AG
Mühlestrasse 14
CH-2540 Grenchen
Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.microcrystal.com
Version 1.0/02.2015