VCXO2E Datasheet, PDF (1/2 Pages) MICORO CRYSTAL SWITZERLAND – This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques.

VCXO2E family package 5×3.2 mm
T range up to 210°C 5 to 40MHz
DIMENSIONS
Package:
Bottom view
5.00
Recommended Solder Pad:
1.5
2.7
1.5
1.6
2.35
4
3
1
2
1
2
1.6
3.20
4
3
100% Leadfree, RoHScompliant:
pin 1 VC
pin 2 GND
pin 3 Fout
pin 4 Vdd
All dimensions in mm typical
SMT Voltage control oscillator in
ceramic package
Fundamental quartz mode frequency
High shock and vibration resistance
Wide temperature range
Low aging
Ultra low MSL
Very fast start-up
Excellent solderability
Swiss made quality
Customer specification on request
ELECTRICAL
CHARACTERISTICS AT +25°C
DESCRIPTION:
This SMD oscillator in ceramic package has been specially designed for
surface mount using infrared, vapor phase or epoxy techniques.
Applications:
- Downhole and Well drilling equipments
- Avionics
- Airbone equipments
- Geothermal equipments
- Fire fighter equipments
The VCXO2E's are supplied on trays (128 pcs / tray)
For pick-and-place equipment, the parts are available in 12mm tapes
with 250 parts min
1000 parts min
Absolute Frequency Pulling range APR ΔF/F
(Minimum frequency deviation including 2)*
ppm
Tempperature range
B= -40 to 85°C
C= -55 to 125°C
E= -10 to 150°C
D= -10 to 175°C
G= -10 to 210°C
≤ ± 130
≤ ± 110
≤ ± 90
≤ ± 50
≤ ± 30
Supply voltage ± 5%
1)*
Vdd
3.3
V
Input current
Idd
see table 1
Output signal
HC-MOS compatible
Symmetry at Vdd/2
40 / 60
%
Rise & fall time
(load 15pf 20% to 80%)
≤5
ns
Level "0" & "1"
<0.4>Vdvd-0.5
V
Start-up time
t
<5
ms
Load min / max
3/47
pF
* 1) C = 47nF ceramic must be connected between GND & Vdd
* 2) APR is inclusive of frequency deviation due to stability
adjustment at +25°C,
long term aging 1 year
over supply voltage ±5%
over load min to max
frequency stability over T range