PIC24E Datasheet, PDF (9/30 Pages) Microchip Technology – STARTER KIT USER’S GUIDE

Preface
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at:
http://www.microchip.com/support
DOCUMENT REVISION HISTORY
Revision A (November 2010)
This is the initial released version of this document.
Revision B (May 2011)
This revision includes the following updates:
• Replaced OTG with the word “device” in the last bullet item in 1.1 “Starter Kit
Contents”
• Removed item 10 from 1.2.1 “Top Assembly” and Figure 1-1
• Removed micro-A and USB OTG from item 3 in 1.2.2 “Bottom Assembly”
• Removed USB OTG and micro-A from Figure 2-1 in 2.1 “High-Level Block
Diagram”
• Updated the second item in the bulleted list in 2.2.2 “Power Supply”
• Removed OTG mode from the bulleted list and the corresponding paragraph in
2.2.4 “dsPIC33E/PIC24E USB Connectivity”
• Replaced OTG with DEVICE in the Power Distribution/Switching schematic
(Figure A-4) and added “Do not populate” in the USB Connections schematic
(Figure A-8) in A.2 “Application Hardware Schematics”
© 2010-2011 Microchip Technology Inc.
DS51936B-page 9