PIC10LF322-I Datasheet, PDF (9/210 Pages) Microchip Technology – 6/8-Pin, High-Performance, Flash Microcontrollers

PIC10(L)F320/322
TABLE 1-2: PIC10(L)F320/322 PINOUT DESCRIPTION
Name
Function
Input Output
Type Type
Description
RA0/PWM1/CLC1IN1/CWG1A/
AN0/ICSPDAT
RA0
PWM1
CLC1IN1
CWG1A
AN0
ICSPDAT
RA1/PWM2/CLC1/CWG1B/AN1/
CLKIN/ICSPCLK/NCO1CLK
RA1
PWM2
CLC1
CWG1B
AN1
CLKIN
ICSPCLK
NCO1CLK
RA2/INT/T0CKI/NCO1/CLC1IN2/
CLKR/AN2/CWG1FLT
RA2
INT
T0CKI
NCO1
CLC1IN2
CLKR
AN2
CWG1FLT
RA3/MCLR/VPP
RA3
MCLR
VPP
VDD
VDD
VSS
VSS
Legend: AN = Analog input or output
TTL = CMOS input with TTL levels
HV = High Voltage
TTL CMOS General purpose I/O with IOC and WPU.
— CMOS PWM output.
ST
— CLC input.
— CMOS CWG primary output.
AN
— A/D Channel input.
ST CMOS ICSP™ Data I/O.
TTL CMOS General purpose I/O with IOC and WPU.
— CMOS PWM output.
— CMOS CLC output.
— CMOS CWG complementary output.
AN
— A/D Channel input.
ST
— External Clock input (EC mode).
ST
— Serial Programming Clock.
ST
— Numerical Controlled Oscillator external clock input.
TTL CMOS General purpose I/O with IOC and WPU.
ST
— External interrupt.
ST
— Timer0 clock input.
— CMOS Numerically Controlled Oscillator output.
ST
— CLC input.
— CMOS Clock Reference output.
AN
— A/D Channel input.
ST
— Complementary Waveform Generator Fault 1 source input.
TTL
— General purpose input.
ST
— Master Clear with internal pull-up.
HV
— Programming voltage.
Power — Positive supply.
Power — Ground reference.
CMOS = CMOS compatible input or output
ST = CMOS input with Schmitt Trigger levels
 2011 Microchip Technology Inc.
Preliminary
DS41585A-page 9