TC1410_13 Datasheet, PDF (7/26 Pages) Microchip Technology – 0.5A High-Speed MOSFET Drivers

TC1410/TC1410N
3.0 PIN DESCRIPTIONS
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1: PIN FUNCTION TABLE
Pin
TC1410
TC1410N
No. MSOP, PDIP, SOIC MSOP, PDIP, SOIC
1
V_DD
2
IN
3
NC
4
GND
5
GND
V_DD
IN
NC
GND
GND
6
OUT
OUT
7
OUT
8
V_DD
OUT
V_DD
Description
Supply input, 4.5V to 16V
Control input
No connection
Ground
Ground
CMOS push-pull output, common to pin 7
CMOS push-pull output, common to pin 6
Supply input, 4.5V to 16V
3.1 Supply Input (V_DD)
The V_DD input is the bias supply for the MOSFET driver
and is rated for 4.5V to 16V with respect to the ground
pin. The V_DD input should be bypassed to ground with
a local ceramic capacitor. The value of the capacitor is
chosen based on the capacitive load that is being
driven. A value of 1.0 µF is suggested.
3.2 Control Input (IN)
The MOSFET driver input is a high-impedance,
TTL/CMOS-compatible input. The input also has
300 mV of hysteresis between the high and low
thresholds that prevents output glitching even when the
rise and fall time of the input signal is very slow.
3.3 CMOS Push-Pull Output
(OUT, OUT)
The MOSFET driver output is a low-impedance,
CMOS, push-pull style output, capable of driving a
capacitive load with 0.5 A peak currents.
3.4 Ground (GND)
The ground pins are the return path for the bias current
and for the high peak currents that discharge the load
capacitor. The ground pins should be tied into a ground
plane or have very short traces to the bias supply
source return.
 2001-2013 Microchip Technology Inc.
DS20001389E-page 7