TC1303B-PI0EMFTR Datasheet, PDF (6/12 Pages) Microchip Technology – Quick Guide to Microchip Development Tools

Getting Started
Starter Kits
Starter Kits are complete, affordable, turnkey solutions
consisting of hardware and software sufficient for exploring
specific applications or the features of the device family
they represent. Most kits include an on-board or separate
debugger, a CD containing MPLAB IDE and Lite compiler
editions and tutorials. To get started, simply install the
software, start MPLAB IDE, connect the hardware and step
through the easy-to-follow tutorials.
F1 Evaluation Kit (DV164132)
The F1 Evaluation Kit is a
demonstration/development tool for
Enhanced Mid-Range PIC microcontrollers
(PIC12F1XXX/PIC16F1XXX) and includes
the PICkit 3 for quick programming and development.
Populated with a PIC16LF1937 featuring XLP technology,
this platform consists of a 44-pin development board with
prototyping space, 3V LCD glass, support for the Motor
Control add-on and support for PICkit 3 and PICkit Serial
Analyzer. This kit provides a platform for general purpose
development, and includes demonstrations focusing on
low power, LCD and motor control.
MPLAB®Starter Kit for PIC18 MCU (DM180021)
This kit includes an on-board debugger/
programming capability as well as USB
communication, a capacitive touch pad,
potentiometer, acceleration sensor,
MicroSD™ memory card and an OLED display. The board
can function as a USB mouse, joystick or mass storage
device (thumb drive) all using the on-board capacitive
touch sense pads.
PIC18 Development Kit (DV164136)
This kit includes a PIC18 Explorer board,
PICkit 3 Debugger/Programmer, USB
cable and a 9V universal power supply.
The PIC18 Explorer board includes both
the PIC18F8722 and PIC18F87J11
microcontrollers and supports dozens of general purpose
PIC18 families using various processor Plug-in Modules
(PIMs). PICtail daughter boards enable many different
accessory boards to connect to the PIC18 Explorer.
MPLAB®Starter Kit for PIC24H MCUs (DM240021)
The PIC24H Starter Kit is a complete
hardware and software kit for exploring
the power of PIC24H family of MCUs
including a built-in debugger on the
board. A tri-axial accelerometer is provided for acceleration
detection. The starter kit also showcases a low cost audio
playback with an on-board speaker and an OLED display
running the Microchip Graphics library.
MPLAB®Starter Kit for PIC24F MCUs (DM240011)
This kit includes an integrated in-circuit
debugger and programmer, USB device
and host connectors, tri color LED,
capacitive touch pad and an OLED
display. Menu driven demonstration software supports
data logging, thumb drive and graphics applications to test
the PIC24F MCU.
Explorer 16 Starter Kit (DV164037)
This kit is a complete set of tools for
application development supporting
Microchip’s PIC24F, PIC24H and dsPIC33
16-bit and PIC32 32-bit microcontrollers.
This kit includes a MPLAB ICD 3 In-Circuit Debugger, an
Explorer 16 Development Board, a 9V universal power
supply for use with either the Explorer 16 board or the
MPLAB ICD, a serial cable and both a PIC24FJ128GA010
and a dsPIC33F256GP710 device (mounted on plug-in
modules for quick replacement).
MPLAB®Starter Kit for dsPIC DSCs (DM330011)
This starter kit introduces users to the
dsPIC Digital Signal Controller device
using its speech and audio processing
capabilities. The kit is USB-powered, has
on-board debug circuitry and 24-bit codec for high-quality
audio applications. Also on the board are reconfigurable
switches, potentiometers, a temperature sensor and a 4
Mb serial EEPROM to store data such as audio samples.
PIC32 Starter Kit (DM320001)
With over 35 source code examples
to the getting started project, this kit
includes everything needed to write,
program, debug and execute code on a
high performance PIC32 microcontroller.
PIC32 USB Starter Kit II (DM320003-2)
This kit provides the easiest and lowest cost
method to experience the USB and CAN
functionality of the PIC32 microcontrollers.
Users can develop CAN applications using
PIC32 expansion boards. The board contains
everything need to develop USB embedded host/device/
OTG applications by combining this board with Microchip's
free USB software.
PIC32 Ethernet Starter Kit (DM320004)
The PIC32 Ethernet Starter Kit provides
the easiest and lowest cost method to
experience 10/100 Ethernet development
with PIC32. Combined with Microchip's
free TCP/IP software, your project will be
running in no time. The PIC32 has an available CAN2.0b
peripheral and USB host/device/OTG.
6 Quick Guide to Microchip Development Tools