MTD6508_17 Datasheet, PDF (6/18 Pages) Microchip Technology – 3-Phase BLDC Sensorless Fan Controller Demonstration Daughter Board

MTD6508 3-PHASE BLDC SENSORLESS
FAN CONTROLLER DEMONSTRATION
DAUGHTER BOARD
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB^® IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MTD6508 3-Phase BLDC Sensorless Fan Controller Demonstration Daughter Board.
Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the MTD6508 3-Phase BLDC Sensorless Fan
Controller Demonstration Daughter Board as a development tool to emulate and debug
firmware on a target board. The manual layout is as follows:
• Chapter 1. “Product Overview” – Important information about the MTD6508
3-Phase BLDC Sensorless Fan Controller Demonstration Daughter Board.
• Chapter 2. “Installation and Operation” – Includes instructions on how to get
started with the MTD6508 3-Phase BLDC Sensorless Fan Controller Demonstration
Daughter Board.
• Appendix A. “Schematics and Layouts” – Shows the schematic and layout
diagrams for the MTD6508 3-Phase BLDC Sensorless Fan Controller
Demonstration Daughter Board.
• Appendix B. “Bill of Materials (BOM)” – Lists the parts used to build the
MTD6508 3-Phase BLDC Sensorless Fan Controller Demonstration Daughter
Board.
 2016 Microchip Technology Inc.
DS50002515A-page 6