RFHCS362F Datasheet, PDF (57/60 Pages) Microchip Technology – Code Hopping Encoder with UHF ASK/FSK Transmitter

rfHCS362G/362F
rfHCS362G/362F PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
PART NO.
X
/XX
XXX
Device
Temperature Package
Range
Pattern
Device
rfHCS362G: RF Code Hopping Encoder
rfHCS362F: RF Code Hopping Encoder
rfHCS362GT: RF Code Hopping Encoder (Tape & Reel)
rfHCS362FT: RF Code Hopping Encoder (Tape & Reel)
Temperature Range I
= -40°C to+85°C
Package
SO =
SS =
300 mil SOIC
209 mil SSOP
Pattern
Special Requirements
* JW Devices are UV erasable and can be programmed to any device configuration. JW Devices meet the electrical requirement of
each oscillator type.
Sales and Support
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office
2. The Microchip Corporate Literature Center U.S. FAX: [phone]
3. The Microchip Worldwide Site (www.microchip.com)
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
New Customer Notification System
Register on our web site (www.microchip.com/cn) to receive the most current information on our products.
© 2002 Microchip Technology Inc.
Preliminary
DS41189A-page 57