PIC10F222-I Datasheet, PDF (51/86 Pages) Microchip Technology – High-Performance Microcontrollers with 8-bit A/D

PIC10F220/222
RETLW
Return with Literal in W
Syntax:
[ label ] RETLW k
Operands:
0 ≤ k ≤ 255
Operation:
k → (W);
TOS → PC
Status Affected: None
Description:
The W register is loaded with the
eight-bit literal ‘k’. The program
counter is loaded from the top of
the stack (the return address). This
is a two-cycle instruction.
RLF
Rotate Left f through Carry
Syntax:
[ label ]
RLF f,d
Operands:
0 ≤ f ≤ 31
d ∈ [0,1]
Operation:
See description below
Status Affected: C
Description:
The contents of register ‘f’ are
rotated one bit to the left through
the Carry Flag. If ‘d’ is ‘0’, the
result is placed in the W register. If
‘d’ is ‘1’, the result is stored back in
register ‘f’.
C
register ‘f’
RRF
Rotate Right f through Carry
Syntax:
[ label ] RRF f,d
Operands:
0 ≤ f ≤ 31
d ∈ [0,1]
Operation:
See description below
Status Affected: C
Description:
The contents of register ‘f’ are
rotated one bit to the right through
the Carry Flag. If ‘d’ is ‘0’, the
result is placed in the W register. If
‘d’ is ‘1’, the result is placed back
in register ‘f’.
C
register ‘f’
SLEEP
Enter SLEEP Mode
Syntax:
[label] _SLEEP
Operands:
None
Operation:
00h → WDT;
0 → WDT prescaler;
1 → TO;
0 → PD
Status Affected: TO, PD, RBWUF
Description:
Time-out Status bit (TO) is set. The
Power-down Status bit (PD) is
cleared.
RBWUF is unaffected.
The WDT and its prescaler are
cleared.
The processor is put into Sleep
mode with the oscillator stopped.
See section on Sleep for more
details.
SUBWF
Subtract W from f
Syntax:
[label] SUBWF f,d
Operands:
0 ≤ f ≤ 31
d ∈ [0,1]
Operation:
(f) – (W) → (dest)
Status Affected: C, DC, Z
Description:
Subtract (2’s complement method)
the W register from register ‘f’. If ‘d’
is ‘0’, the result is stored in the W
register. If ‘d’ is ‘1’, the result is
stored back in register ‘f’.
SWAPF
Swap Nibbles in f
Syntax:
[label] SWAPF f,d
Operands:
0 ≤ f ≤ 31
d ∈ [0,1]
Operation:
(f<3:0>) → (dest<7:4>);
(f<7:4>) → (dest<3:0>)
Status Affected: None
Description:
The upper and lower nibbles of
register ‘f’ are exchanged. If ‘d’ is
‘0’, the result is placed in W
register. If ‘d’ is ‘1’, the result is
placed in register ‘f’.
© 2007 Microchip Technology Inc.
DS41270E-page 49