English
Language : 

PIC32MZ Datasheet, PDF (5/30 Pages) Microchip Technology – PIC32MZ Embedded Connectivity with Floating Point Unit Family Starter Kit
PIC32MZ EF FAMILY STARTER KIT
USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB® X IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family Starter Kit.
Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Development Systems Customer Change Notification Service
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the PIC32MZ Embedded Connectivity with Float-
ing Point Unit (EF) Family Starter Kit (also referred to as “starter kit”) as a development
tool to emulate and debug firmware on a target board. This user’s guide is composed
of the following chapters:
• Chapter 1. “Introduction” provides a brief overview of the starter kit, highlighting
its features and uses.
• Chapter 2. “Hardware” provides the hardware descriptions of the starter kit.
• Appendix A. “Schematics” provides a block diagram, board layouts, and
detailed schematics of the starter kit.
• Appendix B. “Bill of Materials” provides the bill of materials for the components
used in the design and manufacture of the starter kit.
 2015 Microchip Technology Inc.
DS70005230A-page 5