PIC18F2525_05 Datasheet, PDF (4/8 Pages) Microchip Technology – Clarifications/Corrections

PIC18F2525/2620/4525/4620
11. Module: Electrical Characteristics
Parameters D031A and D041A have been added
to Section 26-3 “DC Characteristics”, as shown
below:
26.3 DC Characteristics: PIC18F2525/2620/4525/4620 (Industrial)
PIC18LF2525/2620/4525/4620 (Industrial)
DC CHARACTERISTICS
Param
No.
Symbol
Characteristic
VIL
D031A
VIH
D041A
Input Low Voltage
I/O ports:
with SMBus buffer
Input High Voltage
I/O ports:
with SMBus buffer
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
Min
Max Units
Conditions
VSS
0.8
V
2.1
VDD
V
12. Module: Electrical Characteristics
In Table 26-1: Memory Programming Require-
ments, parameters D132, D132A, D133 and
D133A have been changed. The changes are
shown in bold:
TABLE 26-1: MEMORY PROGRAMMING REQUIREMENTS
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
Param
No.
Sym
Characteristic
Min Typ† Max Units
Conditions
Program Flash Memory
D132 VIE VDD for Block Erase
3.0
—
5.5
V Using ICSP™ port, 25°C
D132A VIW VDD for Externally Timed Erase 4.5
—
5.5
V Using ICSP port, 25°C
or Write
D133 TIE ICSP Block Erase Cycle Time
—
4
—
ms VDD ≥ 4.5V
D133A TIW ICSP Erase or Write Cycle Time 1
(externally timed)
—
—
ms VDD ≥ 4.5V, 25°C
D133A TIW Self-Timed Write Cycle Time
—
2
— ms
13. Module: Pinout I/O Descriptions
The QFN column has been removed from Table 1-2:
PIC18F2525/2620 Pinout I/O Descriptions.
The PIC18F2525/2620 devices are not available
in a QFN package.
DS80222B-page 4
© 2005 Microchip Technology Inc.