MCP9509CT-E Datasheet, PDF (4/28 Pages) Microchip Technology – Resistor-Programmable Temperature Switches

MCP9509/10
DC CHARACTERISTICS (CONTINUED)
Electrical Specifications: Unless otherwise indicated, V_DD = 2.7V to 5.5V, T_A = -40°C to +125°C, and
GND = Ground.
Parameters
Sym
Min
Typ
Max Unit
Conditions
Outputs (OUT, OUT)
Output Voltage High, MCP9510
Output Voltage Low, MCP9510
Output Voltage Low, MCP9509
Internal Output Pull-up (MCP9510)
Open-Drain Output Leakage
Power Supply Rejection
V_OH
V_OL
V_OL
R_OUT
I_Leak
PSR
V_DD - 0.55
GND
GND
60
—
—
—
—
—
100
1
0.05
V_DD
V I_OUT = 5 mA
0.3
V ^{OUTSET = V}DD ^{or GND}
0.3
V I_OUT = 5 mA
140 kΩ OUTSET Unconnected
—
µA MCP9509/10
— °C/V
Thermal Response
SOT23-5, SOT23-6
t_RES
—
1.7
—
s Time to 63% (88°C).
+25°C (Air) to +125°C
(oil bath)
Note 1: This specification is tested at mid supply of 4.1V for optimum operation across the supply voltage range of
2.7V to 5.5V.
TEMPERATURE CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated, V_DD = 2.7V to 5.5V, T_A = -40°C to +125°C, and
GND = Ground.
Parameters
Sym
Min
Typ Max Units
Conditions
Temperature Ranges
Specified Temperature Range
Operating Temperature Range
Storage Temperature Range
Thermal Package Resistances
T_A
-40
— +125
°C (Note 1)
T_A
-40
— +125
°C
T_A
-65
— +150
°C
Thermal Resistance, 5L-SOT23
θ_JA
— 220.7 —
°C/Ω
Thermal Resistance, 6L-SOT23
θ_JA
— 190.5 —
°C/Ω
Note 1: Operation in this range must not cause T_J to exceed Maximum Junction Temperature (+150°C).
DS22114A-page 4
© 2008 Microchip Technology Inc.