MCP1320T-25LE Datasheet, PDF(4/44 Page) Microchip Technology

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

MCP1320T-25LE Datasheet, PDF (4/44 Pages) Microchip Technology – Voltage Supervisor

◁

MCP131X/2X

DC CHARACTERISTICS (CONTINUED)

Electrical Specifications: Unless otherwise indicated, all limits are specified for VDD = 1V to 5.5V, RPU = 100 kÎ©

(only MCP1320, MCP1321, and MCP1322), TA = -40Â°C to +125Â°C.

Parameters

Sym Min Typ Max Units

Conditions

VDD Trip Point (Conât) MCP13XX-34 VTRIP 3.349 3.40 3.451 V TA = +25Â°C (Note 1)

(Note 6)

3.315 3.40 3.385 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-35

3.448 3.50 3.553 V TA = +25Â°C (Note 1)

(Note 6)

3.413 3.50 3.588 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-36

3.546 3.60 3.654 V TA = +25Â°C (Note 1)

(Note 6)

3.510 3.60 3.690 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-37

3.645 3.70 3.756 V TA = +25Â°C (Note 1)

(Note 6)

3.608 3.70 3.793 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-38

3.743 3.80 3.857 V TA = +25Â°C (Note 1)

(Note 6)

3.705 3.80 3.895 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-39

3.842 3.90 3.959 V TA = +25Â°C (Note 1)

(Note 6)

3.803 3.90 3.998 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-40

3.940 4.00 4.060 V TA = +25Â°C (Note 1)

(Note 6)

3.900 4.00 4.100 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-41

4.039 4.10 4.162 V TA = +25Â°C (Note 1)

(Note 6)

3.998 4.10 4.203 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-42

4.137 4.20 4.263 V TA = +25Â°C (Note 1)

(Note 6)

4.095 4.20 4.305 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-43

4.236 4.30 4.365 V TA = +25Â°C (Note 1)

(Note 6)

4.193 4.30 4.408 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-44

4.334 4.40 4.466 V TA = +25Â°C (Note 1)

(Note 6)

4.290 4.40 4.510 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-45

4.433 4.50 4.568 V TA = +25Â°C (Note 1)

(Note 6)

4.388 4.50 4.613 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-46

4.531 4.60 4.669 V TA = +25Â°C (Note 1)

4.485 4.60 4.715 V TA = -40Â°C to +125Â°C (Note 2)

MCP13XX-47

4.630 4.70 4.771 V TA = +25Â°C (Note 1)

(Note 6)

4.583 4.70 4.818 V TA = -40Â°C to +125Â°C (Note 2)

VDD Trip Point Tempco

TTPCO

Â±40

â ppm/Â°C

Note 1: Trip point is Â±1.5% from typical value.

2: Trip point is Â±2.5% from typical value.

3: Hysterysis is minimum = 1%, maximum = 6% at +25Â°C.

4: This specification allows this device to be used in PICÂ® microcontroller applications that require the In-Cir-

cuit Serial Programmingâ¢ (ICSPâ¢) feature (see device-specific programming specifications for voltage

requirements). The total time that the RST pin can be above the maximum device operational voltage

(5.5V) is 100s. Current into the RST pin should be limited to 2 mA. It is recommended that the device oper-

ational temperature be maintained between 0Â°C to +70Â°C (+25Â°C preferred). For additional information,

refer to Figure 2-35.

5: This parameter is established by characterization and is not 100% tested.

6: Custom ordered voltage trip point; minimum order volume requirement. Information available upon request.

DS21985B-page 4

▷