HCS410 Datasheet, PDF (35/36 Pages) Microchip Technology – KEELOQ CODE HOPPING ENCODER AND TRANSPONDER

HCS410
HCS410 PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
HCS410 —
/P
Package:
P = Plastic DIP (300 mil Body), 8-lead
SN = Plastic SOIC (150 mil Body), 8-lead
ST = TSSOP (4.4 mm Body), 8-lead
Temperature
Range:
Blank = 0˚C to +70˚C
I = –40˚C to +85˚C
Device:
HCS410 Code Hopping Encoder
HCS410T Code Hopping Encoder (Tape and Reel)
Sales and Support
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office.
2. The Microchip Corporate Literature Center U.S. FAX: [phone].
3. The Microchip’s Bulletin Board, via your local CompuServe number (CompuServe membership NOT required).
© 1997 Microchip Technology Inc.
Preliminary
DS40158C-page 35