English
Language : 

24C02C-ISN Datasheet, PDF (3/30 Pages) Microchip Technology – 2K 5.0V I2C™ Serial EEPROM
24C02C
TABLE 1-2: AC CHARACTERISTICS
AC CHARACTERISTICS
Electrical Characteristics:
Industrial (I): VCC = +4.5V to 5.5V
Automotive (E): VCC = +4.5V to 5.5V
TA = -40°C to +85°C
TA = -40°C to +125°C
Param.
No.
Sym.
Characteristic
Min.
Max. Units
Conditions
1
FCLK Clock frequency
—
100
kHz —
—
400
(I-temp)
2
THIGH Clock high time
4000
600
—
ns —
—
(I-temp)
3
TLOW Clock low time
4700
1300
—
ns —
—
(I-temp)
4
TR
SDA and SCL rise time
(Note 1)
—
1000
ns —
—
300
(I-temp)
5
TF
SDA and SCL fall time
(Note 1)
—
300
ns —
(I-temp)
6
THD:STA Start condition hold time
4000
600
—
ns —
—
(I-temp)
7
TSU:STA Start condition setup time
4700
600
—
ns —
—
(I-temp)
8
THD:DAT Data input hold time
0
—
ns (Note 2)
9
TSU:DAT Data input setup time
250
—
ns —
100
—
(I-temp)
10
TSU:STO Stop condition setup time
4000
600
—
ns —
—
(I-temp)
11
TAA
Output valid from clock
(Note 2)
—
3500
ns —
—
900
(I-temp)
12
TBUF Bus free time: Time the bus
4700
must be free before a new
1300
transmission can start
—
ns —
—
(I-temp)
13
TOF
Output fall time from VIH
10 + 0.1CB 250
ns (Note 1)
minimum to VIL maximum
CB ≤ 100 pF
14
TSP
Input filter spike suppression
—
(SDA and SCL pins)
50
ns (Note 3)
15
TWC Write cycle time (byte or
page)
—
1.5
ms —
1
(I-temp)
16
—
Endurance
1,000,000 — cycles 25°C (Note 4)
Note 1: Not 100% tested. CB = total capacitance of one bus line in pF.
2: As a transmitter, the device must provide an internal minimum delay time to bridge the undefined region
(minimum 300 ns) of the falling edge of SCL to avoid unintended generation of Start or Stop conditions.
3: The combined TSP and VHYS specifications are due to new Schmitt Trigger inputs, which provide
improved noise spike suppression. This eliminates the need for a TI specification for standard operation.
4: This parameter is not tested but ensured by characterization. For endurance estimates in a specific
application, please consult the Total Endurance™ Model, which can be obtained from Microchip’s web site
at www.microchip.com.
© 2008 Microchip Technology Inc.
DS21202J-page 3