24AA025E48 Datasheet, PDF (3/28 Pages) Microchip Technology – 2K I2C™ Serial EEPROMs with EUI-48™ Node Identity

24AA02E48/24AA025E48
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings ^(†)
VCC............................................................................................................................................................................. 6.5V
All inputs and outputs w.r.t. VSS ..........................................................................................................-0.3V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied..................................................................................................-40°C to +85°C
ESD protection on all pins  4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at those or any other conditions
above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
TABLE 1-1: DC CHARACTERISTICS
DC CHARACTERISTICS
Industrial (I):
TA = -40°C to +85°C, VCC = +1.7V to +5.5V
Param.
No.
Sym.
Characteristic
Min.
—
SCL, SDA, A0, A1, and
—
A2 pins
D1
VIH
High-level Input Voltage 0.7 VCC
D2
VIL
Low-level Input Voltage
—
D3
VHYS Hysteresis of Schmitt
Trigger inputs
0.05 VCC
D4
VOL
Low-level Output Voltage
—
D5
ILI
Input Leakage Current
—
D6
ILO
Output Leakage Current —
D7
CIN,
Pin Capacitance
—
COUT (all inputs/outputs)
D8
ICC write Operating Current
—
D9
ICC read
—
D10 ICCS
Standby Current
—
Typ.
—
—
—
—
—
—
—
—
0.1
0.05
0.01
Max.
—
—
0.3 VCC
—
0.40
±1
±1
10
3
1
1
Note: This parameter is periodically sampled and not 100% tested.
Units
——
Conditions
V—
V—
V (Note)
V IOL = 3.0 mA, VCC = 2.5V
A VIN = VSS or VCC
A VOUT = VSS or VCC
pF VCC = 5.0V (Note)
TA = 25°C, FCLK = 1 MHz
mA VCC = 5.5V, SCL = 400 kHz
mA —
 Industrial
SDA = SCL = VCC
WP = VSS
 2010 Microchip Technology Inc.
DS22124D-page 3