TC1029 Datasheet, PDF(2/14 Page) TelCom Semiconductor, Inc – LINEAR BUILDING BLOCK

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

TC1029 Datasheet, PDF (2/14 Pages) TelCom Semiconductor, Inc – LINEAR BUILDING BLOCK - DUAL LOW POWER OP AMP

◁

TC1029

1.0 ELECTRICAL

CHARACTERISTICS

ABSOLUTE MAXIMUM RATINGS*

Supply Voltage ......................................................6.0V

Voltage on Any Pin .......... (VSS â 0.5V) to (VDD + 0.5V)

Junction Temperature....................................... +150Â°C

Operating Temperature Range............. -40Â°C to +85Â°C

Storage Temperature Range .............. -55Â°C to +150Â°C

*Stresses above those listed under "Absolute Maximum

Ratings" may cause permanent damage to the device. These

are stress ratings only and functional operation of the device

at these or any other conditions above those indicated in the

operation sections of the specifications is not implied.

Exposure to Absolute Maximum Rating conditions for

extended periods may affect device reliability.

TC1029 ELECTRICAL SPECIFICATIONS

Electrical Characteristics: Typical values apply at 25Â°C and VDD = 3.0V; TA = -40Â° to +85Â°C, and VDD = 1.8V to 5.5V, unless

otherwise specified.

Symbol

Parameter

Min

Typ

Max

Units

Test Conditions

VDD

AVOL

VICMR

VOS

Supply Voltage

Supply Current, Operating

Large Signal Voltage Gain

Common Mode Input Voltage

Range

Input Offset Voltage

VOS(DRIFT)

GBWP

Input Bias Current

Input Offset Voltage Drift

Gain Bandwidth Product

Slew Rate

1.8

VSS - 0.2

-100

VOUT

CMRR

PSRR

ISRC

Output Signal Swing

VSS + 0.05

Common Mode Rejection Ratio

Power Supply Rejection Ratio

Output Source Current

ISINK

Output Sink Current

Input Noise Voltage

Input Noise Voltage Density

100

Â±100

Â±0.3

Â±4

125

5.5

VDD + 0.2

ÂµA

V/mV

All Outputs Open

RL = 10kâ¦, VDD = 5V

Â±500

Â±1.5

100

VDD â 0.05

ÂµV

ÂµV/Â°C

kHz

mV/Âµsec

ÂµVpp

nV/âHZ

VDD = 3V, VCM = 1.5V, TA = 25Â°C,

TA = -40Â°C to 85Â°C

TA = 25Â°C; VCM = VDD to VSS

VDD = 3V; VCM = 1.5V

VDD = 1.8V to 5.5V;

VO = VDD to VSS

CL = 100pF;

RL = 1M to GND,

Gain = 1

VIN = VSS to VDD

RL = 10kâ¦

TA = 25Â°C; VDD = 5V;

VCM = VDD to VSS

TA = 25Â°C; VCM = VSS;

VDD = 1.8V to 5V

VIN = VDD

Output Shorted to VSS

VDD = 1.8V; Gain = 1

VIN = VSS,

Output Shorted to VDD

VDD = 1.8V; Gain = 1

0.1Hz to 10Hz

1kHz

DS21340B-page 2

▷