MCP6041 Datasheet, PDF(2/32 Page) Microchip Technology – 600 nA, Rail-to-Rail Input/Output Op Amps

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

MCP6041 Datasheet, PDF (2/32 Pages) Microchip Technology – 600 nA, Rail-to-Rail Input/Output Op Amps

◁

MCP6041/2/3/4

1.0 ELECTRICAL

CHARACTERISTICS

1.1 Maximum Ratings*

VDD - VSS ......................................................................................7.0 V

All inputs and outputs................................... VSS â0.3 V to VDD +0.3 V

Difference Input voltage ..................................................... |VDD - VSS|

Output Short Circuit Current ...............................................continuous

Current at Input Pins .................................................................. Â±2 mA

Current at Output and Supply Pins ..........................................Â±30 mA

Storage temperature ...................................................-65Â°C to +150Â°C

Ambient temp. with power applied ..............................-55Â°C to +125Â°C

ESD protection on all pins (HBM).....................................................â¥ 4 kV

*Notice: Stresses above those listed under âMaximum Ratingsâ may

cause permanent damage to the device. This is a stress rating only and

functional operation of the device at those or any other conditions

above those indicated in the operational listings of this specification is

not implied. Exposure to maximum rating conditions for extended peri-

ods may affect device reliability.

PIN FUNCTION TABLE

Name

Function

+IN/+INA/+INB/+INC/+IND

Non-inverting Inputs

-IN/-INA/-INB/-INC/-IND

Inverting Inputs

VDD

Positive Power Supply

VSS

Negative Power Supply

OUT/OUTA/OUTB/OUTC/OUTD Outputs

Chip Select

No internal connection to

MCP6041/2/3/4 DC ELECTRICAL SPECIFICATIONS

Electrical Characteristics: Unless otherwise indicated, all limits are specified for VDD = +1.4 V to +5.5 V, VSS = GND, TA = 25 Â°C,

VCM = VDD/2, RL = 1 Mâ¦ to VDD/2, and VOUT ~ VDD/2

Parameters

Sym

Min

Typ

Max

Units

Conditions

Input Offset:

Input Offset Voltage

Drift with Temperature

Power Supply Rejection

VOS

-3.0

âVOS/âT

PSRR

Â±1.5

+3.0

ÂµV/Â°C

VCM = VSS

TA= -40Â°C to+85Â°C

Input Bias Current and Impedance:

Input Bias Current

Input Bias Current Over Temperature

Input Offset Current

Common Mode Input Impedance

Differential Input Impedance

Common Mode:

IOS

ZCM

ZDIFF

1.0

100

1.0

1013||6

â¦||pF

TA= -40Â°C to+85Â°

Common-Mode Input Range

Common-Mode Rejection Ratio

Open Loop Gain:

VCMR VSSâ0.3

VDD+0.3

CMRR

dB VDD = 5 V,

VCM = -0.3 V to 5.3 V

dB VDD = 5 V,

VCM = 2.5 V to 5.3 V

dB VDD = 5 V,

VCM = -0.3 V to 2.5 V

DC Open Loop Gain (large signal)

AOL

115

dB RL = 50 kâ¦ to VDD/2,

100 mV < VOUT < (VDD â

100 mV)

Output:

Maximum Output Voltage Swing

Linear Region Output Voltage Swing

Output Short Circuit Current

Power Supply:

VOL, VOH VSS + 10

VDD â 10

mV RL = 50 kâ¦ to VDD/2

VOVR VSS + 100 â VDD â 100 mV RL = 50 kâ¦ to VDD/2,

AOL â¥ 95 dB

mA VOUT = 2.5 V, VDD = 5 V

Supply Voltage

Quiescent Current per amplifier

VDD

1.4

5.5

0.3

0.6

1.0

ÂµA IO = 0

DS21669B-page 2

▷