MCP6001_05 Datasheet, PDF(2/28 Page) Microchip Technology

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

MCP6001_05 Datasheet, PDF (2/28 Pages) Microchip Technology – 1 MHz, Low-Power Op Amp

◁

MCP6001/2/4

1.0 ELECTRICAL

CHARACTERISTICS

Absolute Maximum Ratings â

VDD â VSS ........................................................................7.0V

All Inputs and Outputs ................... VSS â 0.3V to VDD + 0.3V

Difference Input Voltage ...................................... |VDD â VSS|

Output Short-Circuit Current .................................continuous

Current at Input Pins ....................................................Â±2 mA

Current at Output and Supply Pins ............................Â±30 mA

Storage Temperature.....................................-65Â°C to +150Â°C

Maximum Junction Temperature (TJ) .......................... +150Â°C

ESD Protection On All Pins (HBM;MM) ............... â¥ 4 kV; 200V

â Notice: Stresses above those listed under âMaximum

Ratingsâ may cause permanent damage to the device.

This is a stress rating only and functional operation of

the device at those or any other conditions above those

indicated in the operational listings of this specification

is not implied. Exposure to maximum rating conditions

for extended periods may affect device reliability.

DC ELECTRICAL SPECIFICATIONS

Electrical Characteristics: Unless otherwise indicated, TA = +25Â°C, VDD = +1.8V to +5.5V, VSS = GND, VCM = VDD/2,

RL = 10 kÎ© to VDD/2 and VOUT â VDD/2.

Parameters

Sym

Min

Typ

Max Units

Conditions

Input Offset

Input Offset Voltage

VOS

-4.5

+4.5

mV VCM = VSS (Note 1)

Input Offset Drift with Temperature ÎVOS/ÎTA â

Â±2.0

ÂµV/Â°C TA= -40Â°C to +125Â°C,

VCM = VSS

Power Supply Rejection Ratio

PSRR

dB VCM = VSS

Input Bias Current and Impedance

Input Bias Current:

Industrial Temperature

Extended Temperature

Input Offset Current

Common Mode Input Impedance

Differential Input Impedance

Common Mode

IOS

ZCM

ZDIFF

Â±1.0

pA TA = +85Â°C

1100

pA TA = +125Â°C

Â±1.0

1013||6

Î©||pF

1013||3

Î©||pF

Common Mode Input Range

Common Mode Rejection Ratio

Open-Loop Gain

VCMR VSS â 0.3 â VDD + 0.3 V

CMRR

dB VCM = -0.3V to 5.3V,

VDD = 5V

DC Open-Loop Gain (Large Signal) AOL

Output

112

dB VOUT = 0.3V to VDD â 0.3V,

VCM = VSS

Maximum Output Voltage Swing

Output Short-Circuit Current

Power Supply

VOL, VOH VSS + 25 â VDD â 25 mV VDD = 5.5V

ISC

Â±6

mA VDD = 1.8V

Â±23

mA VDD = 5.5V

Supply Voltage

VDD

1.8

5.5

Quiescent Current per Amplifier

100

170

ÂµA IO = 0, VDD = 5.5V, VCM = 5V

Note 1: MCP6001/2/4 parts with date codes prior to December 2004 (week code 49) were tested to Â±7 mV minimum/

maximum limits.

DS21733F-page 2

▷