24LC024-IP Datasheet, PDF (2/30 Pages) Microchip Technology – 2K I2C™ Serial EEPROM

24AA024/24LC024/24AA025/24LC025
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings^(†)
VCC.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. VSS ......................................................................................................... -0.3V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied ................................................................................................-40°C to +125°C
ESD protection on all pins ......................................................................................................................................................≥ 4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. These are stress ratings only and functional operation of the device at these or any other conditions above
those indicated in the operation sections of the specifications is not implied. Exposure to Absolute Maximum Rating
conditions for extended periods may affect device reliability.
TABLE 1-1: DC SPECIFICATIONS
DC CHARACTERISTICS
Industrial (I): TA = -40°C to +85°C, VCC = +1.7V to +5.5V
Automotive (E): TA = -40°C to +125°C, VCC = +2.5V to +5.5V
Param.
No.
Symbol
Characteristic
Min.
Typ.
Max. Units
Conditions
—
A0, A1, A2, SCL, SDA
—
—
—
and WP pins
D1
VIH
High-level input voltage 0.7 VCC —
—
D2
VIL
Low-level input voltage
—
—
0.3 VCC
D3
VHYS Hysteresis of Schmitt 0.05 VCC —
—
Trigger inputs
D4
VOL
Low-level output voltage
—
—
0.40
D5
ILI
Input leakage current
—
—
±1
D6
ILO
Output leakage current
—
—
±1
D7
CIN,
Pin capacitance
COUT (all inputs/outputs)
—
—
10
D8
ICC write Operating current
—
0.1
3
D9
ICC read
—
0.05
1
D10 ICCS
Standby current
—
0.01
1
—
—
5
Note: This parameter is periodically sampled and not 100% tested.
——
V—
V 0.2 VCC for VCC < 2.5V
V (Note)
V IOL = 3.0 mA, VCC = 2.5V
μA VIN = VSS or VCC
μA VOUT = VSS or VCC
pF VCC = 5.5V (Note)
TA = 25°C, FCLK = 1 MHz
mA VCC = 5.5V, SCL = 400 kHz
mA —
μA Industrial
μA Automotive
SDA = SCL = VCC
A0, A1, A2, WP = VSS
DS21210N-page 2
© 2009 Microchip Technology Inc.