24AA1026_15 Datasheet, PDF (2/30 Pages) Microchip Technology – 1024K I2C�� Serial EEPROM

24AA1026/24LC1026/24FC1026
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings^(†)
VCC.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. VSS .......................................................................................................... -0.6V to VCC+1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied ................................................................................................-40°C to +125°C
ESD protection on all pins 4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
TABLE 1-1: DC CHARACTERISTICS
DC CHARACTERISTICS
Electrical Characteristics:
Industrial (I): VCC = +1.7V to 5.5V TA = -40°C to +85°C
Automotive (E): VCC = +2.5V to 5.5V TA = -40°C to +125°C
Param.
No.
Symbol
Characteristic
D1
VIH High-Level Input Voltage
D2
VIL Low-Level Input Voltage
D3
VHYS Hysteresis of Schmitt
Trigger Inputs
(SDA, SCL pins)
D4
VOL Low-Level Output Voltage
Min.
Max.
0.7 VCC
—
0.05 VCC
—
0.3 VCC
0.2 VCC
—
—
0.40
D5
ILI Input Leakage Current
—
±1
D6
ILO Output Leakage Current
D7
CIN, Pin Capacitance
COUT (all inputs/outputs)
D8
ICCREAD Operating Current
ICCWRITE
D9
ICCS Standby Current
—
±1
—
10
—
450
—
5
—
5
Note: This parameter is periodically sampled and not 100% tested.
Units
V
V
V
V
V
µA
µA
pF
µA
mA
µA
Conditions
VCC 2.5V
VCC < 2.5V
VCC  2.5V (Note)
IOL = 3.0 mA @ VCC = 4.5V
IOL = 2.1 mA @ VCC = 2.5V
VIN = VSS or VCC
VIN = VSS or VCC
VOUT = VSS or VCC
VCC = 5.0V (Note)
TA = 25°C, FCLK = 1 MHz
VCC = 5.5V, SCL = 400 kHz
VCC = 5.5V
SCL = SDA = VCC = 5.5V
A1 = A2 = WP = VSS
DS20002270E-page 2
 2011-2015 Microchip Technology Inc.