24AA08-IP Datasheet, PDF (2/40 Pages) Microchip Technology – 8K I2C™ Serial EEPROM

24AA08/24LC08B
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings ^(†)
VCC.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. VSS ......................................................................................................... -0.3V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied ................................................................................................-40°C to +125°C
ESD protection on all pins  4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at those or any other conditions
above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
TABLE 1-1: DC CHARACTERISTICS
DC CHARACTERISTICS
VCC = +1.7V to +5.5V
Industrial (I): TA = -40°C to +85°C
Automotive (E): TA = -40°C to +125°C
Param.
No.
Symbol
Characteristic
Min.
Typ.
Max. Units
Conditions
—
WP, SCL and SDA pins
—
—
—
D1
VIH
High-level input voltage 0.7 VCC
—
—
D2
VIL
Low-level input voltage
—
—
0.3 VCC
D3
VHYS
Hysteresis of Schmitt 0.05 VCC —
—
Trigger inputs (SDA,
SCL pins)
D4
VOL
Low-level output voltage
—
—
0.40
D5
ILI
Input leakage current
—
—
±1
D6
ILO
Output leakage current —
—
±1
D7
CIN,
Pin capacitance
COUT (all inputs/outputs)
—
—
10
D8
ICC write Operating current
—
0.1
3
D9
ICC read
—
0.05
1
D10 ICCS
Standby current
—
0.01
1
—
—
5
Note: This parameter is periodically sampled and not 100% tested.
——
V—
V—
V (Note)
V IOL = 3.0 mA, VCC = 2.5V
A VIN = .1V to VCC
A VOUT = .1V to VCC
pF VCC = 5.0V (Note)
TA = 25°C, FCLK = 1 MHz
mA VCC = 5.5V, SCL = 400 kHz
mA —
A Industrial
A Automotive
SDA = SCL = VCC
WP = VSS
DS21710K-page 2
 2002-2012 Microchip Technology Inc.