HCS200_11 Datasheet, PDF (19/34 Pages) Microchip Technology – KEELOQ® Code Hopping Encoder 32-bit hopping code

HCS200
9.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings^(†)
VDD Supply voltage ......................................................................................................................................-0.3 to 13.3V
VIN Input voltage ............................................................................................................................................ -0.3 to 13.3
VOUT Output voltage ........................................................................................................................... -0.3 to VDD + 0.3V
IOUT Max output current ......................................................................................................................................... 25 mA
TSTG Storage temperature (Note) .............................................................................................................. -55 to +125°C
TLSOL Lead soldering temp (Note)......................................................................................................................... 300°C
VESD ESD rating .....................................................................................................................................................4000V
† _{NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the}
device. This is a stress rating only and functional operation of the device at those or any other condi-
tions above those indicated in the operation listings of this specification is not implied. Exposure to max-
imum rating conditions for extended periods may affect device reliability.
TABLE 9-1: DC CHARACTERISTICS
Commercial(C):Tamb = 0°C to +70°C
Industrial(I):Tamb = -40°C to +85°C
Parameter
Operating Current (avg)
Sym.
ICC
Standby Current
High Level Input Voltage
ICCS
VIH
Low Level Input Voltage
VIL
High Level Output Voltage
VOH
Low Level Output Voltage
VOL
Pull-Down Resistance;
S0-S2
RS0-2
Pull-Down Resistance;
PWM
RPWM
Note: Typical values are at 25°C.
3.5V < VDD < 13.0V
Min
Typ*
Max Unit
0.4 VDD
-0.3
0.5 VDD
40
0.6
1.0
1.5
3.0
mA
8.0
12.0
1
10
μA
VDD+
V
0.3
0.15 VDD V
V
0.08 VDD V
60
80
KΩ
80
120
160
KΩ
Conditions
VDD = 3.5V
VDD = 6.6V
VDD = 13.0V
IOH = -2.0 mA
IOL = 2.0 mA
VIN = 4.0V
VIN = 4.0V
© 2011 Microchip Technology Inc.
DS40138D-page 19