DSPIC30F6015-30I Datasheet, PDF (184/236 Pages) Microchip Technology – High-Performance, 16-Bit Digital Signal Controllers

dsPIC30F6010A/6015
TABLE 24-10: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
VOL
Output Low Voltage⁽²⁾
DO10
I/O ports
—
— 0.6
V IOL = 8.5 mA, VDD = 5V
—
— TBD V IOL = 2.0 mA, VDD = 3V
DO16
OSC2/CLKO
—
— 0.6
V IOL = 1.6 mA, VDD = 5V
(RC or EC Osc mode)
VOH
Output High Voltage⁽²⁾
—
— TBD V IOL = 2.0 mA, VDD = 3V
DO20
I/O ports
VDD – 0.7 — —
V IOH = -3.0 mA, VDD = 5V
TBD
——
V IOH = -2.0 mA, VDD = 3V
DO26
OSC2/CLKO
VDD – 0.7 — —
V IOH = -1.3 mA, VDD = 5V
(RC or EC Osc mode)
TBD
——
V IOH = -2.0 mA, VDD = 3V
Capacitive Loading Specs
on Output Pins⁽²⁾
DO50 COSC2 OSC2/SOSC2 pin
—
— 15 pF In XTL, XT, HS and LP modes
when external clock is used to
drive OSC1.
DO56 CIO
DO58 CB
All I/O pins and OSC2
SCL, SDA
—
— 50 pF RC or EC Osc mode
—
— 400 pF In I²C™ mode
Legend: TBD = To Be Determined
Note 1: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: These parameters are characterized but not tested in manufacturing.
FIGURE 24-1:
BROWN-OUT RESET CHARACTERISTICS
VDD
BO10
(Device in Brown-out Reset)
BO15
(Device not in Brown-out Reset)
Reset (due to BOR)
Power-up Time-out
DS70150C-page 182
© 2007 Microchip Technology Inc.