|
HCS500 Datasheet, PDF (18/24 Pages) Microchip Technology – KEELOQ CODE HOPPING ENCODER | |||
|
◁ |
HCS500
8.0 ELECTRICAL CHARACTERISTICS FOR HCS500
Absolute Maximum Ratingsâ
Ambient temperature under bias...............................................................................................................-40°C to +85°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on any pin with respect to VSS (except VDD)......................................................................... -0.6V to VDD +0.6V
Voltage on VDD with respect to Vss................................................................................................................... 0 to +7.0V
Total power dissipation (Note) .............................................................................................................................. 700 mW
Maximum current out of VSS pin ........................................................................................................................... 200 mA
Maximum current into VDD pin .............................................................................................................................. 150 mA
Input clamp current, IIK (VI < 0 or VI > VDD) .........................................................................................................± 20 mA
Output clamp current, IOK (VO < 0 or VO >VDD) ..................................................................................................± 20 mA
Maximum output current sunk by any I/O pin.......................................................................................................... 25 mA
Maximum output current sourced by any I/O pin..................................................................................................... 25 mA
Note: Power dissipation is calculated as follows: PDIS = VDD x {IDD - â IOH} + â {(VDDâVOH) x IOH} + â(VOl x IOL)
â NOTICE: Stresses above those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this speciï¬cation is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
DS40153B-page 18
Preliminary
© 1997 Microchip Technology Inc.
|
▷ |